We'll connect you with nearby partnered installers who know this exact setup.

Roadmaster

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

Part Number: 1545-1

2221 Reviews | 22 Questions

In Stock

$575.00

Retail:$632.50

You Save: $57.50

Not Confirmed to Fit

2024 Jeep Wrangler 4xe

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Tow Bar Base Plate 1545-1 - Hitch Pin Attachment - Roadmaster

1545-1 - Hitch Pin Attachment Roadmaster Tow Bar Base Plate

1545-1 - Partially Hidden Roadmaster Tow Bar Base Plate

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms Partially Hidden 1545-1

1545-1 - Partially Hidden Roadmaster Removable Draw Bars

1545-1 - Hitch Pin Attachment Roadmaster Removable Draw Bars

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms Hitch Pin Attachment 1545-1

Show All (12) Product Images

Show Fewer Product Images

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

The crossbar-style hidden brackets attach to your vehicle's frame to provide attachment points for your tow bar. The visible portions of the brackets can be removed when you are not towing. Great Prices for the best tow bar base plate from Roadmaster. Roadmaster Crossbar-Style Base Plate Kit - Removable Arms part number 1545-1 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (2221)
Q & A (0)
Related Parts
Photos

Roadmaster Tow Bar Base Plate - 1545-1

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Ready for Flat Towing: Creates strong frame-mounted points to securely tow your vehicle behind your RV.
Blends In When Not Towing: Removable drawbars leave brackets virtually invisible for a clean look.
Easy to Attach and Remove: Square front arms secure with hitch pins for quick setup and disconnect.
Built to Last: Computer-cut, all-steel construction with black powder coat resists rust and wear.
Simple Installation: Custom-fit design mounts without welding and includes instructions and hardware.

Features to know about

Made for a Clean Front End: Hidden Brackets with Removable Drawbars

When you’re not towing, you don’t want bulky brackets sticking out. This crossbar-style setup uses hidden brackets that bolt to the frame, keeping your front end clean. The square drawbars come off with two hitch pins, leaving behind brackets that sit tucked inside the grille—protected from scrapes and barely visible once the arms are removed.

Built to Last on the Road: All-Steel, Computer-Cut Construction

Flat towing puts a lot of force on your hardware, so strength matters. This kit uses computer-cut, all-steel construction for tight tolerances and consistent pulling strength. The black powder coat finish adds durability and corrosion resistance for long-term use through cross-country hauls or years of weekend trips.

Simple Attach and Remove: Quick Pin Connection

Hooking up doesn’t have to be a chore. The square drawbars slide into the base plate sockets and secure with hitch pins—no tools or complex alignment steps needed. When it’s time to unhook, just pull the pins and store the arms in seconds. That quick-disconnect design makes setup easy whether you’re working alone or breaking camp in a hurry.

Reliable Fit and Easy Setup: Custom Mounting with No Welding

This base plate kit is built for a precise, custom fit that lines up with your vehicle’s existing frame points. The installation is straightforward and requires no welding. It includes the mounting hardware and instructions you need for a confident bolt-on install that’s ready for the road once complete.

Stay Compatible with Your Tow System: Works with Roadmaster Tow Bars

If you’re already using a Roadmaster tow bar, this kit fits right in. It connects with Roadmaster tow bars when used with a quick-disconnect crossbar (910021-00, sold separately), so you can keep your current setup while adding a clean, reliable base plate that locks in securely every time you tow.

Specs

Construction

Material: Computer-cut, all-steel construction provides exceptional strength
Finish: Black powder coat finish is durable and corrosion resistant

Design and Features

Bracket Design: Hidden bracket design - drawbars are easily removable via 2 pins
Aesthetics: Improved aesthetics compared with standard brackets
Draw Bars: Removable draw bars
Attachment: Hitch pin attachment
Visibility: Partially hidden when installed
Installation: Simple installation - no welding required
Fit: Custom base plates ensure a perfect fit for your vehicle
Compatibility: Compatible with Roadmaster tow bars with use of quick-disconnect crossbar (910021-00 - sold separately)
Included Components: Instructions and mounting hardware included
Country of Manufacture: Made in the USA
Warranty: Limited Lifetime Warranty

Note

The visible portions of the brackets can be removed when you are not towing. Once the drawbars have been removed, the remaining brackets are virtually invisible.

1545-1 Road Master XL Base Plate Kit

Installation Details 1545-1 Installation instructions

This Product Fits The Following Vehicles

1998 - 2005 Honda Accord Coupe
2006 - 2007 Honda Accord excluding Hybrid
1998 - 2004 Honda Accord Sedan
2005 - 2005 Honda Accord Sedan - excluding Hybrid

4.8

2221 reviews

5 Stars		(1871)
4 Stars		(264)
3 Stars		(48)
2 Stars		(13)
1 Star		(25)

by: Ken 11/07/2014

First let me say that all of my MANY questions were answered with great patience. I called on 2 separate occasions and both representatives where extremely helpful. Being one who always seems to wait until the last minute. I asked if I ordered it on Tuesday would I have it in time to install that weekend. I was assured I would and I did! It was a pretty straight forward install with the helpful instructions. Which had detailed colored pictures. It's surprising the difference colored pictures make. You can actually see what their pointing out. As opposed to most instructions you get today. Where it's impossible to make out what there saying. I would absolutely order from etrailer again. As a matter of fact I did. I ordered my tow vehicle lighting kit from them a few days later. I was unsure which kit to pick and received the same great assistance.

by: Mel W. 05/22/2013

1999 Honda Accord

Installation instructions were superb. Tow bar easy to attach.

Mel W. One Year Later

5/23/2014

I dont have the car that I bought the base plate for, however, I bought a new Honda CR-V and had a Road Master base plate put on it and it is really working out great.

by: Mark 09/27/2019

2001 Honda Accord

Photos were a little difficult to follow but eventually made sense. Product installed fairly easily. More photos of finished product and partially finished installation from a distance to help get a better idea of where things attach would have been helpful.

The fact they made me buy a separate adapter bar to attach to front of the vehicle because the holes in the front mounting plates were 2" too close was a little unfair. They should have made the mounting plates a little wider so holes 4" apart could have accommodated my tow bar. Oh well, just another $60 down the tube.

by: Charles 04/15/2016 One Year Later

After one year it is still working very well. But the installation directions really suck. If you're a good mechanic and you can do this yourself. I'm glad I bought Roadmaster equipment because it seems to be the best and strongest. I would highly recommend them.

by: Rob M 09/15/2015

2003 Honda Accord

Product I feel is excellent. I had to drill a few holes. Someone with few tools it was still possible. It did take about 5 hours to install baseplate and wire kit for lights.

by: Ed A 07/13/2017

2004 Honda Accord

Good fit, reasonably ease of installation.

by: Tom 12/15/2023 One Year Later

It’s been a year and everything works great. Easy to hookup, and just as easy to unhook. Halfway you

by: rwood 02/02/2011

fits my car perfectly. i like their web site its so easy to use.

by: fred mitchell 10/10/2012

good excellent look good

by: Robert 09/12/2024 One Year Later

by: Paul 05/14/2021

by: John 12/24/2021

2004 Honda Accord

by: Bruce A 07/02/2026 One Year Later

Installation was a bit trying. Ended up looking very clean and almost invisible.
Using the tow bar worked super easy and our motorhome hardly noticed the Mini Cooper back there.

Click to Enlarge

Claire H.

7/6/2026

It really is invisible! It took me a second to even find the base plates in your photo!

by: Christian 05/13/2026

1995 Jeep Grand Cherokee

Bolted right up. Installation should be done with bumper on, as you can't fit the ends through the louvers without some convincing. Works great so far. Was able to use a Stowmaster 5000 with it.

Click to Enlarge

Kate F.

5/14/2026

Thanks for the review and for sharing your installation experience Christian. Your tip about leaving the bumper on during install is really helpful, especially since fitting the ends through the louvers can take a little extra maneuvering. It’s also great to hear the setup works well with your Stowmaster 5000. The install looks great, and we appreciate you sharing the picture! Where did you go for the first trip?

Christian

5/20/2026

@KateF Hudson Parcher County park in Rainier, OR

Kate F.

5/21/2026

@Christian I just looked it up, looks like quite the magical place! Thanks for sharing =)

by: Robert 01/06/2025

Came quickly and is very high quality. Great directions/video from road master makes the installation step by step easy to follow.
Skill level is probably at the intermediate level depending on experience.

Click to Enlarge

Robert One Year Later

1/7/2026

Everything related to my Mini towing system is working great after a year of use.i do wish I had bought a cover for the tow bar though. Keeping it clean would be easier with the cover. Great products and service from etrailet

by: Robin 11/21/2024

The #118-3 is a perfect fit on my 1995 Geo Tracker. When you pull off the removable arms you would never know they are there. The Quality is very good easy to put on all you have to do is drill 4 holes the tube on the base plate fits into the tube on the frame of the tracker and with the 2 bolts it is a solid fit. I was worried about the plate nut getting it inside of the frame but it went in easy when you put it over the frame tube and use a thin piece of metal to slide it in place. I’m very happy with it. I probably could of got it on without taking my bumper off but with only 4 bolts holding my bumper on it made it easier

Click to Enlarge

Robin One Year Later

11/25/2025

Working great these are durable tow bars Have no problems with them easy to hook up and tows vehicle without no problems .

by: Charlevoixboy 12/10/2025

2007 honda Element

Awesome delivery speed, and a well made base plate for my 2007 Element. Installation was a breeze (thanks to my son’s heated shop) and I had to do no cutting to make this fit. I had a Stowmaster tow bar that came with my RV and etrailer was able to steer me to the correct missing parts to make this a really affordable installation. Now to get out of this snow!

Click to Enlarge

by: Michael 12/03/2025 One Year Later

2004 Subaru Impreza

We towed our 2004 Subaru Impreza WRX STI 3000 miles last year, this is an ideal setup, discreet when not in use, solid, and easy to get on/off. Very please with the support I received from Roadmaster as one of the bolt was missing, was sent super quickly.

Click to Enlarge

by: James 07/02/2025 One Year Later

Replaced same part that was damaged in a crash. I had used my original one for close to ten years without issue. Fast shipping from etrailer.

James One Year Later

7/3/2026

New system working fine. As with previous system it requires towed vehicle to be nearly perfectly aligned straight behind motorhome to disconnect without considerable tension.

by: David 05/23/2025

The Base plate kit is well made and came with all the necessary hardware.Installation is relatively straight forward. I did have to enlarge two of the holes that didn't quite line up. But overall I'd recommend it.

David One Year Later

5/24/2026

It continues to work flawlessly

by: Steven 08/09/2026

Overall the installation was great, however the process of drilling 3 - 1/2" holes in that little bumper that has a Rockwell Hardness of about 60, seems to be a bit over the top.The instructions are spot on, delivery was great, the quality of product was accurate. I am a happy boy!

by: Thomas 07/29/2026

2015 Chevrolet Equinox

Fit and finish is great, the illustration for what you trim on the bumper isn't great but otherwise pretty easy install (I ended up measuring between the mounts on the draw bar and just trimmed accordingly)

Christopher H.

8/4/2026

Thanks for you feedback Thomas! Sounds like the install went smooth. Hope you have a great summer!

by: Larry 05/05/2026 One Year Later

I’ve been purchasing products from ETrailer since 2005 and all the products I’ve purchased have been a great value. The products mentioned above installed perfectly and with the direct assistance from ETrailer everything fit as suggested. I will always interact with ETrailer as needs present themselves.

Claire H.

5/7/2026

Thank you so much for the kind words and being a repeat customer with us! We look forward to helping you out with all your future adventures!

by: Brad 06/22/2026

After ordering the wrong crossbar, etrailer sent the correct one for our Mini Cooper quickly. However I did have to modify most of the holes as the cross bar didn’t quite fit (but close). I had to drill the three main bolt holes to 11/16 so that the bar would go over the Mini’s 3 main bumper bolts on both sides. The two lower bolt holes (each side), needed to be drilled out 3 sizes larger to accommodate the 4 bolts that come with the kit. I had to drill out the Minis lower holes to better align with the crossbars lower holes. I would also like to note it being a pain in the knuckles to reach one of the three (each side) bolts to put the stock nuts on the bolt and then try and get them tight. (The main bolt pattern for the upper bumper is diamond shape, one up tow bolts lower. (The lower “inside” bolt on each side is the one that is hard to get to and tighten.) Sorry I didn’t get picks, I was in a rush to get the car back together. There’s an angle piece on the cross bar that blocks the hard to reach bolt, it would be helpful if that could be made more accessible to reach.

by: Julie 05/30/2025 One Year Later

Purchased for a 1997 Subaru Impreza. Delivery was amazingly fast! I didn't have it installed until a few months later, as my travel plans had stalled. It didn't quite bolt right on, but was close, and a friend had to modify it some to make it work. I still hear a grating noise when I turn too sharp on one side, but otherwise it's fine.
The front connection plates didn't line up with the holes, so had to have those modified, as well, in order to line up and attach to the tow bar. Once the new holes were drilled, I was able to hook up and go.
It's relatively easy to connect after finding a way to do it alone.
I've towed from CO to TX and all over TX with it with no problems.

Click to Enlarge

2221

true

Show More Reviews

See what our Experts say about this Roadmaster Tow Bar Base Plate

Do you have a question about this Tow Bar Base Plate?

Parts Needed to Flat Tow a 2006 Honda Accord Behind a Motor Home
Regular trailer wiring harnesses will not work in reverse. they are designed to fail if that is done to protect the vehicle wiring from damage if there were a short circuit on the trailer. You will need a kit specifically designed for flat towing. You can use a diode kit such as # 154-792-118158. You will also want to consult your vehicle owners manual on the proper procedure for towing the vehicle. If you need base plates on your 2006 Accord use # 1545-1 if it is not a Hybrid. For...
view full answer...
Can 2006 Volkswagen Jetta TDI Manual Transmission be Flat Towed
Yes you can flat tow a 2006 Volkswagen Jetta TDI manual transmission. You'd need the base plate kit part # 521230-1 which is a custom fit kit for your vehicle. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect. For lighting/safety cables,...
view full answer...
Recommended Flat Towing System for 2006 Honda Accord with Manual Transmission
If your 2017 Sprinter 3500 has a trailer hitch receiver then you can start working on the flat towing components for your Honda, but if you don't already have that, then I recommend starting with the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704. For your flat towing setup, you will need many different components and I've linked an article to the basic flat towing components to assist. There is baseplates for the vehicle frame custom fit, the tow bar to connect...
view full answer...
Flat Towing Setup Recommendation for a 2000 Honda Accord
First let's start with a base plate for your 2000 Honda Accord. For that the most popular option is the Roadmaster XL Base Plate kit part # 1545-1. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use the...
view full answer...
Parts Needed to Tow a 2001 Honda Accord 4 Down Behind a Class C Motorhome
You will need the Roadmaster XL Base Plate Kit, item # 1545-1, to start with. You will also need a Tow Bar. I have two recommendations. We have a base plate installation video that should be helpful, see link. First, if you are towing from a hitch ball at the rear of your Class C Motorhome, I would recommend the RoadMaster Tracker Tow Bar - 5,000 lbs, item # RM-020, along with a set of Roadmaster Tow Bar Quick Disconnects, item # RM-201, which allows removal of the tow bar without unbolting...
view full answer...
Recommended Tow Bar Base Plates for 2002 and 2004 Honda Accord
According to Roadmaster, their # 1545-1 Base Plate Kit is compatible with a 2002 and 2004 Honda Accord. I am told that the OEM fog lights will not interfere with the installation, but you can see this yourself by clicking on the instruction link or looking at the photo I provided. The base plates can be used with a Blue Ox tow bar, with the addition of the # RM-032 adapter. In addition to the base plates and tow bar, you will also need safety cables (if your tow bar does not already have...
view full answer...
Parts Needed to Flat Tow a 2005 Honda Accord Non Hybrid
We do offer a base plate kit that has been confirmed as a fit for your 2005 Honda Accord non hybrid. For that you would want the part # 1545-1. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use the bulb...
view full answer...
Parts Needed to Flat Tow a 1999 Honda Accord
There are several components needed to flat tow a vehicle like your 1999 Honda Accord. To start you will need a base plate kit. For that I would recommend the Roadmaster XL Base Plate Kit # 1545-1. Next, you will need a tow bar. For that I recommend the the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting I recommend the Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154. I confirmed with Roadmaster...
view full answer...
Parts Needed to Flat Tow 1999 Honda Accord
First you have to start with a base plate kit. Which for that you'd want the Roadmaster kit part # 1545-1 which is a custom fit for your 1999 Honda Accord. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use...
view full answer...
Which Base Plate Kit is Correct for a 2006 Honda Accord
Yes, the Roadmaster XL Base Plate Kit, item # 1545-1 is the correct base plate kit for your 2006 Honda accord. Along with the XL base plate kit you will need a tow bar and wiring for the towed vehicle taillights. With the XL base plate kit you can use any of the Roadmaster tow bars. If you will be towing frequently I would recommend the Falcon 2 or Falcon All Terrain, part # RM-520, # RM-522, because of the convenience they provide and if you will only be towing once or twice a year you...
view full answer...
Base Plates and Other Needed Accessories to Flat Tow 2006 Honda Accord
The Roadmaster base plate kit # 1545-1 comes with full installation instructions. I will send you a .pdf copy in a separate email. According to my research, the 2006 is capable of being flat towed, unless it is a hybrid model with the CVT transmission. Read and follow the guidelines listed in the emergency towing section of your owners manual. In addition to the base plates, you will need a tow bar, safety cables, wiring and in many states and Canadian provinces, a supplemental braking...
view full answer...
What Parts are Needed to Tow a 2000 Honda Accord with a 37 ft Fleetwood Bounder Motor home
Whenever setting up a towing system, read and follow the guidelines listed in the emergency towing section of your owners manual. The five items you need to safely tow a 2000 Honda Accord behind your 2000 Fleetwood Bounder 37 ft. motor home are base plates for your Honda, a compatible tow bar, safety cables, lighting and a supplemental braking system. The base plate for your Honda is the Roadmaster XL # 1545-1. This base plate has removable arms that can be stored away when not in use....
view full answer...
Base Plates, Tow Bar, Wiring, Safety Cables, Braking System to Flat Tow a 2003 Honda Accord
First, you will need to install base plates, # 1545-1, on your 2003 Honda Accord. This will provide an attachment point on the vehicle for the tow bar. Next, you will need a tow bar that is compatible with XL style base plates. There are numerous options and I have included a link to them. I recommend the RoadMaster Tracker Tow Bar, # RM-020, and the Roadmaster Tow Bar Quick Disconnect Kit, # RM-201, which will enable you to detach the removable portion of the base plates. I have included...
view full answer...
Roadmaster Base Plate and Tow Bar Compatibility on 1998 Honda Accord
The Roadmaster XL base plate kit # 1541-1 does not fit your 1998 Accord but the similar kit # 1545-1 does fit, and with it you can use the Roadmaster StowMaster Car-Mount Tow Bar # RM-501. This tow bar also directly fits the base plates you referenced. Safe and legal flat towing requires a number of other components in addition to the tow bar and base plates. If you like you can refer to the linked article on flat towing that covers all of these components, which include a wiring/lighting...
view full answer...
Recommended Base Plate for 2005 Honda Accord Transporting with StowMaster 5000
I can help you find a base plate that will mount to your 2005 Honda Accord. The Roadmaster # 1545-1 are custom fit base plates for your Accord and are compatible with the StowMaster 5000 # RM-501. According to the chart I've attached, there are no adapters available for the StowMaster to work with the base plates from Blue Ox. Some additional items you may need to round out your setup are wiring, safety cables and a braking system. I like the Roadmaster universal wiring kit # RM-152...
view full answer...
2001 Honda Accord EX V6 Base Plate Compatibility
Yes the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms Item # 1545-1 is a compatible fit for a 2001 Honda Accord EX V6 sedan or coupe.
view full answer...
Base Plates, Tow Bar, and Accessories Needed to Flat Tow a 2001 Honda Accord
the first thing you will want to do is consult the vehicle owners manual to determine the proper towing procedure for your 2001 Honda Accord. From what I could find, the vehicle can be flat towed but has not been formally tested. To flat tow a vehicle you will need base plates, a tow bars, safety cables, a lighting solution, and supplemental braking. First, you can use base plates # 1545-1. The base plates provide a safe and secure attachment point for the tow bar. For a compatible tow...
view full answer...
What Parts are Needed to Tow a 2006 Honda Accord Using Stowmaster Tow Bar
You can use Roadmaster Falcon Towbar part # RM-522 to tow your 2006 Honda Accord. You will need mounting brackets. The brackets that will fit your Accord and this tow bar are part # 1545-1. You will also need a wiring kit and safety cables, part # RM-154 and # RM-645. As far as automatic transmission, I suggest contacting your dealer or Honda as they will be able to tell you what precautions to take when towing one of their automatic transmission equipped vehicles. Most states now require...
view full answer...
Base Plates, Tow Bar, Wiring, Safety Cables, and a Braking System to Flat Tow a 1999 Honda Accord
The base plates for each individual vehicle are unique to that vehicle and parts will not be interchangeable. For the 1999 Honda Accord, you would need the Roadmaster XL Base Plates, # 1545-1 that you have referenced. You would then need a compatible tow bar. If you have a tow bar that you used with the Saturn, you can use it on the Accord as well. However, you will need to make sure that the tow bar you are using is compatible with XL style base plates. If not, I recommend the RoadMaster...
view full answer...
Correct Base Plate for 2004 Honda Accord to Fit with Roadmaster StowMaster Tow Bar
You need the Roadmaster Crossbar-Style Base Plate Kit # 1545-1 to tow your 2004 Honda Accord with the Roadmaster StowMaster Tow Bar # RM-501. The StowMaster should have a crossbar with the quick disconnects both for the crossbar and your vehicle. If you no longer have the quick disconnects for the vehicle side then you'll also want to pick up the kit # RM-222 for the car side only.
view full answer...
Parts Needed to Flat Tow 2000 Honda Accord
According to page 294 of the online owner's manual for your 2000 Honda Accord you can tow your vehicle with a tow bar and all 4 wheels on the ground but you'll need to leave your key in Accessory mode and unplug the radio or anything else plugged into that accessory power to prevent your battery from draining. If you have a manual transmission you need to take the parking brake off and shift into neutral but if you have an automatic you need to release the parking brake, start the engine,...
view full answer...
Base Plates, Safety Cables, Wiring, and Braking System to Flat Tow a 1999 Honda Accord
We do carry base plates for your 1999 Honda Accord. Take a look at the XL Base Plates, # 1545-1. These are the correct base plates for your vehicle. I also recommend safety cables and a light kit as required by law. For safety cables, I recommend the Single Hook, Coiled Safety Cables, # RM-643. For a temporary lighting solution, use the Magnetic Towing Light Kit, # RM-2120. These lights have a magnet that will stick to a flat metal surface and plug into a 4-flat on the tow vehicle. For...
view full answer...

Do you have a question about this Tow Bar Base Plate?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Robert G

Expert Research:

Michael H

Expert Research:

Jameson C

Written by:

Lindsey S

Updated by:

Wilson B

Updated by:

Mike S

Updated by:

Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.