Brackets for Center and Side Steps of Fulton Fender F008573

Question

Question:

I am looking at installing Fulton Fenders item # F008573 and mounting them with Galvanized Steel, U-Shaped, Bolt-On Brackets Item # PF1135-BKT-2. I have two questions: 1. Will the brackets support the two side steps of the fender as well as the top step? 2. My Shorelandrfoot trailer frame is 1 1/2inch wide x 3inch tall. Can you recommend a u bolt to mount the bolt on brackets? Thank you.

asked by: Tim

0

Expert Reply:

The brackets part # PF1135-BKT-2 will support the side steps of the Fulton fender # F008573 but not the center step. For the center step you'd need L-brackets like the # PF775-BKT-2.

You'd need u-bolts that are 3-5/8 inches wide which at this time we do not carry.

expert reply by: Jameson C

0

Answer 1

The Fulton Single Axle Trailer Fender #F008583 referenced in your question may work well as a replacement on your 1996 Tracker Boat Trailer. This particular fender is designed for single axle trailers like yours that are equipped with 13 inch tires…

view full answer...

Answer 2

We do indeed have brackets that would work for the Fulton #F008595-2 fenders, part #PF1135-BKT-2. Each set includes two brackets. I've provided a photo showing how the brackets work.

view full answer...

Answer 3

I was able to go out to the warehouse and measure the mounting brackets holes for the PF11X35W and found that it was 5-5/16 inches or 5.3125 inches. If these aren't an exact match, new holes can usually be drilled into the brackets to make them…

view full answer...

Answer 4

I went out to our warehouse to take a look at both the CE Smith Single Axle Trailer Fenders - 12" Grey #CE19502-2 and the larger 13" Black #CE19503-2. Both options represent the only color available from CE Smith in the respective sizes.…

view full answer...

Answer 5

Thanks for the pics Kemo, they really helped! The CE Smith Single Axle Trailer Fenders #CE19504-2 are larger than what you currently have and use a different mounting style. Based on your setup, the CE Smith Fenders wouldn’t bolt onto your existing…

view full answer...

Answer 6

Hello Johnny, thanks for reaching out. The bracket that goes with the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps CE19504-2 is our part number #PF1135-BKT-2. The brackets are 2-3/4" wide x 13-1/4" long. I have included a…

view full answer...

Answer 7

I'd be happy to help you with that. For starters, the #F008584-2 fenders you'd looked at are designed for 14 inch wheels, you'd be better served going with the #F008585-2 which are designed for 15 inch wheels like the ones you have.…

view full answer...

Answer 8

We sure do Preston. The CE Smith Single Axle Trailer Fenders w/ Top and Side Steps item #CE19503-2 you were looking at would use the Mounting Brackets for Trailer Fender - 13" to 15" Wheels item #CE26099GA. These are designed for 8" to…

view full answer...

Answer 9

Hi Keith! The Tie Down Plastic Fender for 13" to 15" Wheels - Black #TD86VR is sold as a single fender, so you would need to order a quantity of two if you are wanting one for each side. The closest we have that is a pair would be the CE…

view full answer...

Answer 10

This trailer was either set up this way by the manufacturer or the owners had to fabricate some extensions and then attach brackets and the stops to make this set up. Extensions would have to be fabricated by a machine shop or a welder and then you…

view full answer...

Answer 11

I spoke with my contact at BoatBuckle and they informed me that the bolt that comes with the Winch Strap part #IMF05848 that you referenced measures 2-3/4 inches in length by 1/4 inch in diameter. We do not carry this bolt as a replacement part but…

view full answer...

Brackets for Center and Side Steps of Fulton Fender F008573

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching