Mounting Hole Dimensions of CE Smith 12" and 13" Plastic Single Axle Fenders

Updated 05/08/2019 | Published 05/07/2019

Products Featured in This Question

CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Gray Plastic - 12" Wheels - Qty 2

(426)

$116.39

CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 2

(426)

$138.05

Question:

what is the distance between the mount holes on the bottom of the fender length from inside to inside mounting holes and outside to outside mounting holes can you post picture of bottom or underside of fender with measurements looking to fit on a 2010 karavan boat trailer with 13 inch wheels but believe caravan part was 12 or 13 fender the mount bracket is welded on so distance of mounting holes is required can you do the same on the 13 inch model so I can see what will fit right do you have the 12 inch in black thanks

asked by: Gary

Expert Reply:

I went out to our warehouse to take a look at both the CE Smith Single Axle Trailer Fenders - 12" Grey # CE19502-2 and the larger 13" Black # CE19503-2. Both options represent the only color available from CE Smith in the respective sizes.

For the 12" # CE19502-2 I measured a distance between the two outside mounting holes, on center, of 31 inches. The distance between the two inside holes is 27 inches. On each mounting surface the holes are spaced apart 4 inches vertically and 2 inches horizontally, on center.

For the 13" # CE19503-2 there is a distance between the two outside mounting on center of 33-3/4 inches and 29-3/4 inches between the two inside holes. The holes on the mounting surfaces are spaced apart 5 inches vertically and 2 inches horizontally, on center.

I have attached images to assist.