Dimensions of Bolt that Comes with the BoatBuckle Boat Winch Strap IMF05848
Updated 06/20/2024 | Published 03/19/2016
Question:
I purchased this 2 X 20inch strap at the end of last season and now that spring has arrived and Im ready to install the strap I cant find the bolt. Ive purchased a used trailer with a Fulton T1801 winch, but the strap and bolts were missing. Can you please tell me the size of the bolt and lock nut and if this bolt is stainless or not? Thanks
asked by: Rob L
Expert Reply:
I spoke with my contact at BoatBuckle and they informed me that the bolt that comes with the Winch Strap part # IMF05848 that you referenced measures 2-3/4 inches in length by 1/4 inch in diameter.
We do not carry this bolt as a replacement part but you should have no problem finding a replacement locally. Be sure to use a lock nut that has Nylock in the nut so that it won't back off by itself.
Product Page this Question was Asked From
BoatBuckle Boat Winch Strap with Hook and Safety Latch - Loop End - 2" x 20' - 1,333 lbs
- Accessories and Parts
- Trailer Winch
- Cables and Straps
- 2 Inch Wide
- 1333 lbs
- Straps
- 20 Feet Long
- BoatBuckle
more information >
Continue Researching
- Search Results: trailer stand
- Search Results: ball mount
- Search Results: trailer jack
- Search Results: cam straps
- Search Results: hitch
- Search Results: bow stop
- Search Results: reflector adhesive
- Shop: Peterson Quick Mount Trailer Reflector - Adhesive Backing - Screw Mount - Oblong - Red
- Shop: CE Smith Safety Chains with S-Hooks - 24" Long - 2000 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Peterson Quick Mount Trailer Reflector - Adhesive Backing - Screw Mount - Oblong - Amber
- Shop: Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 5,000 lbs
- Q&A: Keel Pads For Crossmember On a ShoreLander Boat Trailer
- Video: CE Smith Post-Style Guide-Ons with LED Lights for Boat Trailers: The Breakdown
- Q&A: Torque Settings For Wheel Lug Nuts For Boat Trailer And utility Trailer
- Q&A: Are Replacement Universal Axle Bracket for Firestone Ride-Rite Air Springs F22VV Sold Individually?
- Q&A: Will Roadmaster Base Plate Kit for 2024 Jeep Wrangler 4XE Require Removal of Skid Plate
- Article: Can You Flat Tow a 2025 Chevy Silverado 1500?
- Q&A: Replacement Winch That Has a Mounting Hole On the Top Middle of the Mounting Plate
- Article: Trailer Tire Sizing
- Q&A: How to Find the Correct Idler Hub Replacement for Boat Trailer
- Q&A: Recommended Replacement Hand Winch for a Boat Trailer with a 6,500 Lb Boat
- Article: Boat Trailer Guides: Which are the Best?
- Article: Trailer Lighting Requirements
- Article: Basics of Tie Down Straps
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
Chuck
6/20/2024
Hi Jameson, I have a Shelby Industries winch model # 5407B..I need the bolt and nut to install a new strap. The old strap was wrapped through the holes in the winch and didn't have a bolt..I want to install my strap correctly....do you know the bolt and nut size I need and do you guys offer it....thanks a ton.