Troubleshooting Trailer Fuses Blowing On 2019 Honda Odyssey
Updated 04/08/2021 | Published 04/07/2021
Question:
2019 Honda Odyssey Rear Fuse Panel Slots 10, 11 and 12 are pre-pinned for Trailer Harness. Could you tell me what each slot is specifically for? I am blowing a fuse and need assistance tracking down what the slot is for so that I can troubleshoot the issue.
asked by: James
Expert Reply:
I would be happy to help you identify the functions, but besides knowing that fuse 10, 11, and 12 in your 2019 Honda Odyssey are for the trailer towing functions, Honda does not list specifically what each one does.
Now there is a way to figure out, but it will require a circuit tester like # PTW2993.
What you will need to do is remove one fuse at a time and use the circuit tester on each wire of the 4-way connector and see which function is no longer working.
The function of the connector are as follows:
Brown wire is tail light/clearance lights
Green wire is passenger side tail light
Yellow wire is driver side tail light
White wire is ground which won't have a fuse
You should have one fuse for each function, and that will give you at least a good starting place to start the troubleshooting.
I included a link to a helpful article on wiring for you to take a look at.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Video: Installing the Curt Powered Tail Light Converter on a 2024 Hyundai Kona
- Video: A Closer Look at the Benton ShiftShow Bike Rack for 4 Bikes on a 2019 Honda Odyssey
- Q&A: Complete Towing Setup With Brake Controller for 2025 Honda Odyssey
- Q&A: Can Fulton Trailer Tongue Hinge Kit # FHDPB230101 be Used to Make a Swinging Bike Rack
- Q&A: Parts List To Tow A Trailer With Electric Brakes With 2020 Honda Odyssey
- Q&A: Recommended Hitch and Wiring Harness for 2024 Honda Odyssey EX-L
- Shop: Benton ShiftShow Bike Rack for 4 Bikes - 2" Hitches - Tilts w/ Bikes Loaded
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Shop: Tire Chains
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Video: Inside Look at TowSmart and Oris Hitches with the Manufacturer
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Clean Up Your Trailer Wiring
- Search Results: trailer wiring
- Article: Trailer Wiring Diagrams
- Q&A: Clearance Differences Between Hitches For A 2026 Honda Odyssey EX-L
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Suspension Enhancement
- Search Results: trailer tires and wheels
- Video: Feature Breakdown: Universal Installation Kit for Trailer Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
on Trailer Hitch
