Spindle Compatible With Trailer Idler Hub Assembly AKIHUB-440-2-1K
Published 03/23/2021
Products Featured in This Question
Question:
Do you have a bearing/race and seal kit that would fit this hub? The reason I wanted to replace the hub is because one of the lug bolts has stripped threads and the bearings are not so good anymore. I will fix the lug bolt problem if you have a bearing/race and seal kit that would fit this hub.
asked by: Ron S
Helpful Expert Reply:
The Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased # AKIHUB-440-2-1K won't fit your trailer spindle as it will be too long. The reason is, this hub is designed to work on BT8 spindles, which are longer than what you have.
The only solution we can offer is to replace your short and older spindles with a new one that will work with the Trailer Idler Hub Assembly # AKIHUB-440-2-1K, which is the BT8 Spindle for 2,000 lb Trailer Axles # TRU59FR.
I have added a link below to a video review as well if you'd like to take a look.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: spindle washer
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Video: Feature Review CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles
- Search Results: trailer hubs and drums
- Video: Review of etrailer Trailer Hubs and Drums - Pregreased Idler Hub - AKIHUB-440-2-1K
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Q&A: Replacement Hub Recommendation for Trailer with .99 inch Bearing ID Surface Dimension
- Shop: Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Q&A: Replacement Idler Hub For 1964 Holsclaw Boat Trailer With 1" Diameter Spindle
- Search Results: trailer bearings races seals caps
- Search Results: l44643
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - KE44WV
- Search Results: bearing buddy
- Search Results: hub seals
- Search Results: trailer tires and wheels
- Q&A: Hub length of CE Smith Trailer 13110 and 13100
- Shop: CE Smith Spindle Axle - Weld on - 1-1/16" Diameter
- Shop: CE Smith Spindle Nuts, Washers, and Cotter Pins for 1" Axle - Qty 2
- Shop: Trailer Spindle Nut 1"
- Q&A: Availability Of Hub For Short Spindle
- Q&A: Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
- Q&A: Bearing Buddy Dust Covers for Bearing Buddy with 2.125" Outer Diameter
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Video: All About the Trailer Idler Hub Assembly for 2,000-lb Axles
- Video: In-Depth Review of the Replacement Race for L44643 and L44649 Bearings
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK1-150
Ron S.
3/23/2021
Do you have a bearing/race and seal kit that would fit this hub? The reason I wanted to replace the hub is because one of the lug bolts has stripped threads and the bearings are not so good anymore. I will fix the lug bolt problem if you have a bearing/race and seal kit that would fit this hub.