Availability Of Hub For Short Spindle
Updated 08/26/2025 | Published 08/25/2025
Question:
Looking for a hub that will fit my short spindle. The spindle is 3 1/2 inches long to the very end of the thread. I can send a pic. Bearing will need to be L44643.
asked by: Zach
Expert Reply:
Hello Zach, thanks for reaching out. We do have hubs that fit a 1" diameter straight spindle, but nothing for a 3-1/2" long short spindle. This kind of spindle is obsolete. All of the hubs we offer are more like 4-1/4" long so they will not work.
The only solution in this case would be to replace your spindles with something more modern. This requires welding and special equipment though. An even easier solution would be to just replace the axle entirely.
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Continue Researching
- Search Results: trailer hubs and drums
- Search Results: trailer bearings races seals caps
- Search Results: l44643
- Search Results: trailer axles
- Q&A: What Leaf Spring Should Be Used With 2,000 lb Axle?
- Video: The Low-Down on the Single-Axle Trailer Hanger Kit for Double-Eye Springs
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Q&A: How to Find Replacement for 4 Lug Hubs on Utility Trailer
- Q&A: Spindle Compatible With Trailer Idler Hub Assembly AKIHUB-440-2-1K
- Video: All About the Trailer Idler Hub Assembly for 2,000-lb Axles
- Video: Feature Review CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 2K Trailer Axles - 20-3/8" Long - Dacromet
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Video: In-Depth Review of the etrailer Rust-Resistant 3-Leaf Double Eye Spring for 2K Trailer Axles
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK1-150
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Video: In-Depth Review of the Replacement Race for L44643 and L44649 Bearings
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU94FR
- Shop: Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Q&A: Looking for Hub for 1999 Jayco Qwest 10
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Parts Needed To Add Electric Drum Brakes To 1994 Jayco Pop-Up
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Most Popular Wheel Bearings
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Hubs and Drums
Zach
8/26/2025
Thanks for the info!