Which Roadmaster Tow Defender Fits Blue Ox Tow Bar

Question

Question:

Can you explain the difference between Roadmaster Tow Defender Protective Screening - RM4700 and rm4750? We are towing a brand new 2021 Chevy Traverse with a Blue Ox tow bar... want the best protection for car from stones.

asked by: Jackie S

0

Expert Reply:

The main difference between the Roadmaster Tow Defenders is the flat towing setups they fit. Since you have a Blue Ox tow bar you'd want the part # RM-4750-10. The other models fit a different type of flat towing setup.

expert reply by: Jameson C

0

Answer 1

The Roadmaster Tow Defender Protective Screening #RM-4750 referenced in your question is compatible out of the box with Blue Ox tow bars and Blue Ox brackets. This will work perfectly with your Blue Ox Aventa Tow Bar, provided you also have Blue Ox…

view full answer...

Answer 2

Sounds like you have the Roadmaster Tow Defender #RM-4750 which means for a replacement screen you'd need the #RM-4750-10. Then for the replacement shock you'd need the part #RM-200023-50 and you'd be set.

view full answer...

Answer 3

To replace the support tubes in the Roadmaster Tow Defender part #RM-4700 or part #RM-4750 you need Roadmaster Tow Defender Repair Kit part #RM-4748-10. This repair kit comes with all 4 cross tube pieces and hardware confirmed by Roadmaster. You can…

view full answer...

Answer 4

For your Blue Ox base plate, and your Blue Ox Avail Tow Bar #BX7420, you can use the Roadmaster Tow Defender Protective Screening #RM-4750. This is specifically designed to work with Blue Ox Tow Bars, and Blue Ox base plate brackets. I have included…

view full answer...

Answer 5

Roadmaster has the Tow Defender Protective Screening #RM-4750 which is compatible with Blue Ox tow bars like the Avail Non-Binding Tow Bar #BX7420. The screening will attach to the mount that fits the shank of the tow bars and also on shoulder bolt…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Which Roadmaster Tow Defender Fits Blue Ox Tow Bar

Product Page this Question was Asked From

Continue Researching