Recommendations for Towing a Small Camper With a 2012 Acura MDX
Updated 03/16/2021 | Published 03/11/2021 >
Products Featured in This Question
Question:
Hello, I am inquiring about a hitch for my 2012 Acura MDX but want to make sure I purchase a compatible hitch along with a compatible wiring harness. The hitch we are looking at is item# 75614 and the wiring harness is item #C56038. Looking to tow a small camper around 2000 lbs. Also, we are looking for a temporary adapter for 4pin to 7pin adapter. If you could let me know my best options for my vehicle Id appreciate it.
asked by: Vinny C
Expert Reply:
You have found some great choices yourself. The Draw-Tite # 75614 is the perfect hitch for your 2012 Acura MDX. It is custom fit and requires no drilling. It will not allow you to carry a full size spare tire if you do have one. The Vehicle Wiring Harness with 4-Pole # C56038 is also the correct harness for your vehicle and will plug into the OEM wiring. We have great videos below on the installation of both of these.
For the 7-Way plug use Universal Installation Kit # ETBC7. The 4-Way will plug directly into this to make the complete install simpler for you. You also get all the wiring needed to run to the front of the vehicle for a complete install.
Since the camper will have a 7-Way it will most likely have trailer brakes. To control those I suggest using Curt Echo Wireless Trailer Brake Controller # C51180. It pairs with your smart phone to allow you to use it with different vehicles and trailers. It will also reduce the amount of wiring you will need to install on the 7-Way plug.
For a safer ride I recommend using a Fastway e2 Weight Distribution # FA92-00-0600. It will help level your Acura so that the front doesn't become elevated causing light steering feel and diminished braking. It also will reduce the sway that can be caused when driving by wind and other vehicles. The last thing you want while traveling down the highway is that camper moving side to side in the wind.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media





Continue Researching
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: TowSmart 7-Pole, RV-Style Trailer Connector Socket - Vehicle End
- Shop: Trailer Wiring
- Shop: TowSmart ProClass 7-Blade Trailer Connector w/ Jacketed Cable, Wire Tester - 72" Long
- Shop: Brake Controller
- Q&A: Hitch Option For 2012 Acura MDX With Full Size Spare Tire
- Q&A: Differences Between Curt and Draw Tite Hitch for 2011 Acura MDX
- Q&A: Trailer Hitch And Weight Distribution Recommendation For 2008 Acura MDX
- Shop: Mounting Bracket 4-Pole Flat
- Shop: Replacement Hardware Kit for Trailer Hitches
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Q&A: Bolt Size That Comes with Draw Tite Hitch # 75614
- Q&A: What Is Included With The DeeMaxx Disc Brake Kit DE42FR?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Recommended Trailer Hitch and Wiring for 2012 Acura MDX
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box

