Recommended Replacement Fan Motor For Ventline Model V2245

Question

Question:

I am looking for the fan motor I dont need the fan blade for Ventline model V2245. I believe it was manufactured around 1994. Thanks

asked by: Tami A

0

Expert Reply:

We have reached out to Ventline on this in the past, and for your Ventline Model V2245 you will need the Replacement Fan Motor for Ventline Exhaust Fan # BCD0390-00.

I included a video of the # BCD0390-00 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

I spoke with my contact at Ventline and she stated that for your V2245-50 exhaust fan you can use the Replacement Fan Motor #BCD0390-00. This will work perfectly with your existing fan.

view full answer...

Answer 2

The Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00 is only the motor. This is the correct replacement motor for Ventline models V2045, V2065, V2244, and V2265. The replacement fan blade would be purchased separately and the correct one…

view full answer...

Answer 3

According to Ventline, the correct replacement motor for your model V2245-50 bathroom fan is the Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00.

view full answer...

Answer 4

You can replace the motor in your Ventline V2045 exhaust fan with the Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00 you were looking at. The fan blade replacement is #BVA0312-00 and then the replacement lens is #VC0133-00. These are the…

view full answer...

Answer 5

We spoke with our contact at Ventline and she stated that for your V2245-50 exhaust fan you can use the Replacement Fan Motor #BCD0390-00. The correct fan blade would be the part #BVA0312-00.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Recommended Replacement Fan Motor For Ventline Model V2245

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching