Replacement Fan Motor for Ventline Exhaust Fan
(138 reviews)
Price: $52.60
In Stock
Replacement Fan Motor for Ventline Exhaust Fan
Item # BCD0390-00
Our Price: $52.60
Orders above $99 qualify for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (138)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
Ventline Accessories and Parts - BCD0390-00
- RV Vents and Fans
- Roof Vent
- Motor Parts
- Motor
- Ventline
Replaces the fan motor for your Ventline models V2045, V2065, V2244, and V2265 exhaust fan.
Features:
- Replaces the fan motor for your Ventline models V2045, V2065, V2244, and V2265 exhaust fan
- Quantity: 1 replacement fan
BCD0390-00 Replacement Fan Motor for Ventline Exhaust Fan
Video of Replacement Fan Motor for Ventline Exhaust Fan
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Ventline RV Vent Fan - Motor Replacement - BCD0390-00
Hey guys, it's Randy here at etrailer.com. Today we're going to be taking a look at a replacement fan motor. Now, this motor's going to be a perfect replacement for the Ventline fans. There are a few different models it's going to work for. You've got the V2045, V2065, V2244, and the V2265.There's nothing worse than when you get out there, you kick on your fan to try to get some exhaust out or maybe bring some fresh air in, and it doesn't come on, or even worse, it comes on, and it's really noisy. Basically this is going to be a perfect solution for that.
Customers have commented on how easy it is to replace, how it's the perfect fit, and they we're really surprised that we had the parts available here, even for older model fans.This is going to be a direct plugin. You can see we've got our two-prong plug there, two-tip plug. It's got little notches on two of the corners there. It's going to help you to ensure that you get it put in the right way, that we're sending the right power to the right side.This is going to be your best bet for getting that fan working. Typically with vent fans mounted on the roof, you've got a lot of screws, self-leveling sealer and Butyl tape that you've got to go through to do a complete replacement.
While it's not a bad idea, getting a new, fresh replacement on there, especially if you've got a little bit of a leak or something like that, I think that's the better route. Replace the whole thing, get it all sealed back up and you'll be starting fresh.If you don't have any leaks and you don't have any cracks or any discoloration in the vent itself, well, this is going to be the way to go. It's going to be a much cheaper alternative. It'll allow you to get that fan back functioning. One of the customers even commented they we're really surprised it was even the right RPM.
So, this is going to be a direct replacement, it's going to be no different than what you currently have in there. It's just going to get that fan back and working. Help get some fresh air cycling through or get that hot air out, so you can draw some fresh air in through the windows. Just overall it's going to add to a better camping experience.This is going to mount in using the original hardware, so definitely hang onto that. You'll pull that out, slide this in, get it mounted.
You'll then plug it in and from that point, the control that already exists there, it's going to work, it's going to operate, and it's going to get you right back up and running.So, overall it could be a quick, easy way to get that fan running, restore that comfort that we've lost without it.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- Arrived Damaged
Customer Reviews
Replacement Fan Motor for Ventline Exhaust Fan - BCD0390-00
Average Customer Rating: 4.8 out of 5 stars (138 Customer Reviews)
Replaces the fan motor for your Ventline models V2045, V2065, V2244, and V2265 exhaust fan.by: Larry C10/06/2022
Replaced two motors for exhaust fans. They work better than before!
by: Charles12/23/2022
I'm 63 it's the coldest day in years, it's a perfect match, 1/2hour in running much quieter than the old one. It been in since 1996 long time!If that's any say about this product.Iwell take 2 last me and my family for life.
by: Colleen 08/14/2022
Having the motor of my OLD, OLD bathroom fan finally die put me in panic mode, with dreaded remodeling feared. Thanks to etrailer I got the exact replacement needed. Had to snip off the fancy new plugin attachment and direct wire it in, but hey, I’m familiar with wing nuts by now. Fortunately, I’ve also learned to take photos before removing the broken parts, so installation was a snap. Thanks, etrailer.
by: Jean06/12/2022
Motor worked well. It was a quick and moderately easy install. The client was happy. The only thing I might have liked to be different was if there were longer electric leads on the motor. The fan/light it was going into did not have a plug in connection. It needed to be hard-wired and there wasn't a lot of wire to connect to once I got it routed into the internal junction box. Just would have made it a little bit easier.
by: Cynthia 11/20/2022
Had to replace two fan motors in my mobile home. These were perfect match! Shipping was fast! Thank you!!!
by: Mike09/08/2022
Great price and quality parts. Arrived on time and no damage. I've used etrailer.com before and I will use them again.
by: Todd 11/10/2022
Exact fit for my bathroom, very easy installation and very reasonably priced
by: Gary 11/18/2022
Perfect replacement for an old fan, was glad to find one!!
by: Becca09/25/2022
Exactly what I needed! Easy to find and navigate website and fast shipping! Thank you!
by: Samuel 09/03/2022
Exactly what I needed to replace a burnt out motor installed almost 30 years ago. Thank you!
by: Michael B.09/06/2019
This was a perfect fit. There was no plugin so I had to wire nut. Product came in 3 days with standard delivery. Looked elsewhere but this was the only site that had the exact product. Business done right.
Comments
Good. Like brand new.
Michael B - 09/08/2020by: Steve D09/22/2022
Fit perfect, exact replacement. Works g reat.
by: Kaye08/24/2022
fit right in and reinstalled the fan and light and all working well. glad you knew which part i needed. tanks
by: Kimberly01/21/2023
Very happy with service and product
by: Tina 11/19/2022
This was real easy to order, and fast service. I'd recommend this place to anybody! Thank you
by: Kevin04/30/2022
It fit perfectly in our vent and work great with no special wiring it was a plug and play fit
I will definitely use them again
by: Robin 09/12/2022
Shocked that it was still manufactured and you had it in stock!!!
by: 03/20/2021
The fan motor is great. Installation is very easy and is economical than replacing the entire unit. Operates smooth and quiet. I recently purchased it for a client who is extremely particular he was so pleased he now wants a second one!
by: Jim T11/11/2021
Fan housing did not have a connector for fan to plug into. I had to remove plug , and splice wires. Wires on motor, were not long enough to go into wiring box. Other than that, everything worked fine.
by: Olwyn07/27/2020
The fan and fan blade were a perfect match for what was installed as original equipment in our bath. These products were not available at any local store in our area. The installation was easy as there wasn't nay difference between the old and new. Everything went together as designed. We look forward to many years of service from these products. Thank You!
Comments
The fan and fan Blade are still working as expected. Again, these products were not available locally and it was imperative that a direct replacement be installed.
OLWYN W - 07/31/2021by: David 01/27/2022
The motor arrived quickly, less than 1 week and it was in good order. This replaced the motor in my bathroom vent which is model v2044. This is the correct part even though it is not officially listed in the description. Works perfectly.
by: Robert 09/20/2022
no problems!
by: Dawn05/12/2022
This is what I needed and it works! Had to splice wires since I don't have a plugin.
by: Caryl03/01/2018
Ordered this motor to replace one in a 30 year old Ventline V2245 bathroom exhaust fan and it installed easily and works great. There was a slight delay in shipping (not the fault of etrailers) but it still arrived in a few weeks and they were very efficient with communication keeping me updated. Will use them again.
Comments
The original motor was still working after 30 years but was noisy. This replacement motor seems to be working just fine. Thanks for asking.
Caryl - 03/01/2019by: Bob02/09/2022
The motor arrived as advertised & it was a great fit. Easy to install. Very pleased with the emails and follow up from etrailer.
25
138
Show More Reviews
See what our Experts say about this Ventline Accessories and Parts
- Correct Motor For Ventline V2265 Bathroom FanSome versions of the Ventline fan V2265 have the plug that part # BCD0390-00 connects right into. Not all of them do and you can cut the connector off and hardwire it in. Or we also carry part # BCD0390-01 and hardwire it. The motors are the same. You read correct that your PC41 hood uses the same motor. As well as the V2128 Ventadome, and hoods PH41, PD41, C1245, and C1246.
view full answer... - Replacement Motor for Ventline Roof Vent Model V2045I spoke with my contact at Ventline and he stated that the correct replacement motor for your model V2045 Bathroom Vent will be the Replacement Motor # BCD0390-00. This will include one motor assembly for your existing vent fan.
view full answer... - Diameter of the Fan Shaft for Replacement Fan Motor for Ventline V2045 or V2244 Exhaust FanOn motor # BCD0390-00 the shaft is approximately 0.214 inches so it is slightly larger than 3/16 inches. If you can tell me what this is going on (a model number would be awesome) I can determine if we have a motor that will work.
view full answer... - Motor Replacement Recommendation for Ventline Fan V2244An older motor might start to get louder as it begins to get to the point of failure. We have a new replacement motor part # BCD0390-00 which is the correct replacement for a V2244 like you have. It would be quieter if the noise you are hearing is a bad motor on it's last leg.
view full answer... - Availability of Replacement Motor For Philips V2044 Roof VentVentline used to be a division of Philips, now they're owned by Dexter Axle. The V2044 fan has been discontinued for awhile, but the Ventline # BCD0390-00 would be the correct 110V-AC motor. I've confirmed that these are the proper replacements with my Ventline representative.
view full answer... - Will Replacement Motor # BCD0390-00 Fit Ventline V2045 FanThe Replacement Fan Motor # BCD0390-00 referenced in your question is the correct motor for your Ventline V2045 model fan. I did also go out to our warehouse to take a look at the motor and measured a length of 1-1/2 inches for the exposed length on the shaft.
view full answer...
- Replacement Fan Motor for Ventline Exhaust FanThe Replacement Fan Motor for Ventline Exhaust Fan # BCD0390-00 is designed to fit on Ventline models V2045, V2065, V2244, and V2265 exhaust fan. It's possible that this is what you have in a mobile home, so you'll want to look on the fan or motor for possible identifying information of your fan.
view full answer... - Replacement Motor Recommendation for Ventline Roof Vent V2245According to Ventline the replacement motor you need for your Ventline part number V2245 is the part # BCD0390-00 that you referenced.
view full answer... - Ventline Fan Motor Replacement for Ventline Roof Vent # V2245-50We spoke with my contact at Ventline and she stated that for your V2245-50 exhaust fan you can use the Replacement Fan Motor # BCD0390-00.
view full answer... - Recommended Replacement Fan Motor For Ventline Model V2245We have reached out to Ventline on this in the past, and for your Ventline Model V2245 you will need the Replacement Fan Motor for Ventline Exhaust Fan # BCD0390-00. I included a video of the # BCD0390-00 for you to take a look at.
view full answer... - Tip for Installing Ventline Exhaust Fan Motor # BCD0390-00 If Connector Was RemovedSince the # BCD0390-00 installs by using a connector normally it's hard to know exactly which wire goes where but the easy solution is that you should try connecting them in either configuration and if it works you are good, but if it works in reverse you'd need to reverse the wiring.
view full answer... - Exhaust Fan Motor Replacement for V2065We've spoken with Ventline and they have told us that the correct replacement motor for the Ventline fan V2065 is the part # BCD0390-00. I attached a review video for this for you to check out as well.
view full answer... - Replacement Motor for Ventline Model V2065 Exhaust FanI spoke with my contact at Ventline regarding your Ventline exhaust fan model V2065. He stated that for a replacement motor, you will actually want the Replacement Fan Motor # BCD0390-00. This will work nicely as a replacement on your existing unit so you can get it back up and running.
view full answer... - Do I Need Access to the Roof to Install a Replacement Fan Motor for Ventline Exhaust FanThis is correct; in order to install the Replacement Fan Motor for Ventline Exhaust Fan # BCD0390-00 you'll likely need to gain access to the old motor from the roof since the vent lid will need to be removed.
view full answer... - What is Included with the Replacement Fan Motor for Ventline Exhaust FanThe Replacement Fan Motor for Ventline Exhaust Fan # BCD0390-00 is only the motor. This is the correct replacement motor for Ventline models V2045, V2065, V2244, and V2265. The replacement fan blade would be purchased separately and the correct one would be determined by the model of fan you have now.
view full answer... - How to Remove Bracket for Motor on Ventline V2265It looks like that bracket the motor is installed on has the instructions "squeeze here to remove/install" so you probably want to try doing that and lifting or shifting the bracket around to see if it moves. Your fan will need to be connected to the shaft on the Replacement Fan Motor # BCD0390-00 before you put everything back in place.
view full answer...
- How to Remove the Motor From a Ventline FanThe process may differ depending on your exact model of Ventline Fan, but you will first need to gain access to the motor which will likely require you to go in to the assembly from the top/roof. You will then remove the dome/lid or screen which will allow you to pull the fan blade off the motor shaft. You can then remove the old/existing motor from the bracket, cutting the black and white wires as closely to the current motor terminals as possible. With the motor removed it's just a matter...
view full answer... - Which Wires Are For Power & Ground On The Replacement Ventline Fan MotorThe two black wires for your Ventline Replacement Fan Motor for Ventline Exhaust Fan # BCD0390-00 do not have any designation for power or ground. What changes is the direection the fa will spin. So, the easiest way to do this is too connect it to power and see which way the fan spins. If the fan spins in the direction you want, you're all finished. If not, switch the wires around and try it the other way.
view full answer... - Replacement Motor for Ventline Bathroom Fan V2245-50I spoke with my contact at Ventline and she stated that for your V2245-50 exhaust fan you can use the Replacement Fan Motor # BCD0390-00. This will work perfectly with your existing fan.
view full answer... - Replacement Motor for Ventline V2262-50 Bathroom FanThe correct replacement motor for your Ventline V2262-50 bathroom fan is actually the part # BCD0388-00. This will work perfectly with your existing fan as it is a direct replacement. The # BCD0390-00 Replacement Motor that you mentioned is designed for a different model fan than what you have so it will not be compatible.
view full answer... - Fan Motor Replacement for Philips Bathroom Vent V2044The correct replacement motor you need for the Philips/Ventline RV vent part number V2044 is the part # BCD0390-00 that you mentioned. We've confirmed this as the correct fit. The # BCD0314-00 fits the 75 CFM versions of the vent like you have whereas the part # BCD0390-00 fits the 100 CFM versions.
view full answer... - Accessing Replacement Motor for Ventline V2262The correct replacement motor for your Ventline V2262-50 bathroom fan is the part # BCD0388-00 and it's held on with a couple nuts on top of the support beam like you see in the attached picture. To access the fasteners to remove the beam will require you to remove the lid of the vent.
view full answer...
- Replacement Fan Motor for Ventline Model V2245-50 Bathroom FanAccording to Ventline, the correct replacement motor for your model V2245-50 bathroom fan is the Replacement Fan Motor for Ventline Exhaust Fan # BCD0390-00.
view full answer... - Replacement Fan Blade for Old Ventline V2245 and 110 Volt Electric Motor in Range HoodI show that motor # BCD0390-00 is the correct replacement for your V2245-50 vent. The fan associated with that motor is # BCD0311-00 if your original spins clockwise or # BCD0409-00 if it spins counter clockwise.
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Randy B
Written by:
Hannah L
Updated by:
Adam Y
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.