Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the fan motor for your Ventline models V2045, V2065, V2244, and V2265 exhaust fan.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey guys, it's Randy here at etrailer.com. Today we're going to be taking a look at a replacement fan motor. Now, this motor's going to be a perfect replacement for the Ventline fans. There are a few different models it's going to work for. You've got the V2045, V2065, V2244, and the V2265.There's nothing worse than when you get out there, you kick on your fan to try to get some exhaust out or maybe bring some fresh air in, and it doesn't come on, or even worse, it comes on, and it's really noisy. Basically this is going to be a perfect solution for that.
Customers have commented on how easy it is to replace, how it's the perfect fit, and they we're really surprised that we had the parts available here, even for older model fans.This is going to be a direct plugin. You can see we've got our two-prong plug there, two-tip plug. It's got little notches on two of the corners there. It's going to help you to ensure that you get it put in the right way, that we're sending the right power to the right side.This is going to be your best bet for getting that fan working. Typically with vent fans mounted on the roof, you've got a lot of screws, self-leveling sealer and Butyl tape that you've got to go through to do a complete replacement.
While it's not a bad idea, getting a new, fresh replacement on there, especially if you've got a little bit of a leak or something like that, I think that's the better route. Replace the whole thing, get it all sealed back up and you'll be starting fresh.If you don't have any leaks and you don't have any cracks or any discoloration in the vent itself, well, this is going to be the way to go. It's going to be a much cheaper alternative. It'll allow you to get that fan back functioning. One of the customers even commented they we're really surprised it was even the right RPM.
So, this is going to be a direct replacement, it's going to be no different than what you currently have in there. It's just going to get that fan back and working. Help get some fresh air cycling through or get that hot air out, so you can draw some fresh air in through the windows. Just overall it's going to add to a better camping experience.This is going to mount in using the original hardware, so definitely hang onto that. You'll pull that out, slide this in, get it mounted.
You'll then plug it in and from that point, the control that already exists there, it's going to work, it's going to operate, and it's going to get you right back up and running.So, overall it could be a quick, easy way to get that fan running, restore that comfort that we've lost without it.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Replaced two motors for exhaust fans. They work better than before!
This was a perfect fit. There was no plugin so I had to wire nut. Product came in 3 days with standard delivery. Looked elsewhere but this was the only site that had the exact product. Business done right.
The fan motor is great. Installation is very easy and is economical than replacing the entire unit. Operates smooth and quiet. I recently purchased it for a client who is extremely particular he was so pleased he now wants a second one!
This replaced the ceiling vent fan motor in the bathroom of my mobile home. It fit fine and works perfectly.
Kevin
3/27/2025
Still working great!
Jesse M.
3/27/2025
Got this thirty-eight year old fan working again!
Worked perfect
Excellent customer service. The part ordered fits exactly as the representative said it would. As I live in a manufactured home/trailer home, I will definitely order from you again as I need parts. Best place ever for me to find to order parts for our type of home. The fan motor for our bathroom exhaust fan that I bought works better than the old one I replaced.
Glenn
2/12/2025
Fantastic!!! It went in perfectly and has run fantastic ever since! You guys know what you are talking about!!
Jerred H.
2/12/2025
The motors fit the bathroom exhaust fans great. Ended up hard wiring them both. The male plug that came on the motor has a raised rib on the power side making identification easy. They replaced 1989 vintage model V2045 motors with 1 3/16 exposed shaft 3/16 diameter existing in a double wide mobile home. The 1 1/2 inch shafts on the new motors have different sized sealed bearing housings {smaller/not as tall} as original. Therefore the length difference was a wash. Thank You Katie for your help.
Item arrived and performed as described. Reasonable price, good quality product and performance made this purchase an overall good deal. I recommend this product and seller!
Nyfb4u2
12/24/2025
Product is working GREAT. I highly recommend this product and seller.
This worked perfectly! We have an older model and thanks to this we have it back up and running. The replacement was very simple and easy. etrailer.com was the bomb dot com!
Arrived quick. Fit properly and now I have a working fan. Thank you.
Shipping was fast, arrived 2 days ahead of schedule. Quick installation, it took longer to clean the compartment than to remove and replace the motor.
Parts fit perfect.
Perfect fit, works great.
The fan works great and the shipping was fast
Worked perfectly! 1995 Bonivilla double wide bathroom exhaust fan replacement.
This went into a modular home bathroom fan/light combo. I am a 62 year old woman and it was easy for me to install this! The connection was perfect, just as advertised, perfect replacement and works great! Shipping was quick!
We have 3 more of these in our house, if any others stop working, I will buy it again.
If something else breaks I will check this website before I spend $100s for the repair.
My fan was Hard wired so I had to cut off the plug - the wires ended up being a little too short so I had to splice on about 4 inches to each one-it worked out fine and was a direct replacement and perfect fit - my wife is happy now with no squealing fan motor- thank you-
Perfect fit for my side venting bathroom fans. Easy to install.
It was a compatible replacement to our 1980s fan. Works well
They fit! exact replacement for both of my bathrooms exhaust fans. Had to use wire nuts but wasn't a problem.
This is a replacement motor for the bathroom fan in our mobile home. It is a perfect match. The old motor was wired in. My daughter removed the old motor, cut off the modular connecter on the new motor, and wired it in.It works great.
the motor you sent was perfect but i had to cut off the end plug to hardwire it in ( which i don't know if there were 2 models for that motor) and the lense cover fit so tight at first i thought it wasn't the right one ( lol) i wiggled used a tiny screwdriver & boom perfect fit even better than the original ( probably because of time) So i thank you all for the easy ordering & proper parts.. wasn't crazy about usps delivery though other than that 5 stars great job guys thank you
I recently purchased two Ventline bathroom fan motors from etrailer.com. Prior to my purchase, I contacted them with a couple of questions. I spoke to a very friendly and helpful Rachel M. She was able to answer all of my questions and then took my order. The order was sent out the same day and the motors arrived fairly quickly. I have now installed both fan motors and they work great. The installation was a little tricky because I had to cut off the plug end of the fan motors and wire them directly with electrical wire nuts. If you need a Ventline fan motor, this is the place to buy them.
Motor mounted to original hardware in the mobile home bathroom vent easily. It was a lot easier to install a new motor than to remove the entire vent unit and replace that I had to cut off the connector of the new motor though because there is no male connector in the original wiring harness so I just use two new connectors to attach the wires to the motor. Noise wise the motor makes the same amount of noise as the other motor that was replaced before it stopped working, that doesn't mean it's loud or annoying it just makes some noise. Overall I recommend the motor it was an easy install and made my life easier any exhaust fan works fine again.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Michael B.
9/8/2020
Good. Like brand new.