Teokonsha P3 90195 Brake Controller Installation in 2008 Toyota Tundra
Updated 02/27/2021 | Published 02/25/2021 >
Products Featured in This Question
Question:
I woud like your prodigy 3 for a 2008 tundra. is the wire harness end made to fit my under dash toyota harness controller plug? Is there any replacements pannel available to mount the unit directly into the the dash or the plastic cover that mounts under the steering wheel?
asked by: Larry B
Expert Reply:
To install the Tekonsha P3 into your 2008 Tundra with the factory 7-way, you'll need the # 3040-P wiring harness which plugs into the factory connector behind or above the driver's side kick panel. As long as your Tundra has the factory tow package with the connector under the dash, it'll be a plug and play install.
There aren't any replacement panels available, but if you go to the linked product page for the # 3040-P, you can see several customer submitted photos showing the controller mounted in the center console. On the older Tundra models, it looks like the ashtray was removed and the controller mounted in its place. It looks like that works really well.
If for some reason that location won't work for you, I'd recommend a remote mount controller like the Redarc Tow-Pro Elite, part # RED44FR. The control unit mounts out of sight under the dash, but the control knob can be installed anywhere you wish within the easy reach of the driver. The kit even includes a mounting bezel to give the install a more factory appearance. An un-used switch knockout can be used for that purpose as well. You'll also need the # 331-TPH-017 wiring harness which will plug into the # 3040-P and then the controller.
I've linked to an install video for the P3, showing it being installed in a Tundra as well as to a video showing a typical installation of the Tow-Pro Elite.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Brake Controller
- Video: Installing the Curt Trailer Hitch Receiver on your 2015 Mercedes-Benz E-Class
- Video: Tekonsha ZCI Circuit Protected Vehicle Wiring Harness Installation - 2018 Mercedes-Benz GLS- Class
- Video: Tekonsha ZCI Circuit Protected Vehicle Wiring Harness Installation - 2014 Mercedes-Benz GL-Class
- Video: ZCI Circuit Protected Vehicle Wiring Harness Installation - 2017 Mercedes-Benz GLE
- Search Results: prodigy p2
- Article: Trailer Wiring Diagrams
- Video: Comparing the Tekonsha Prodigy P3 and Redarc Tow-Pro Liberty Brake Controllers
- Video: Making sure the Redarc Tow-Pro Liberty Brake Controller Fits
- Shop: Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness - Dash Knob - Up to 2 Axles - Proportional
- Shop: Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Video: Trailer Brake Controller Wire Testing
- Q&A: Can Trailer Brake Assemblies Ground at the Frame and the Connector
- Q&A: Recommended Brake Controller and Plug in Adapter for a 2017 Toyota Tundra
- Q&A: Which Install Harness Is Needed to Install P3 Brake Controller in 2017 Toyota Tundra
- Q&A: Trailer Brake Controller Wiring Connector Location on 2015 Toyota Tundra
- Shop: Thetford Aqua-Magic VI RV Toilet - Standard Height - Round Bowl - Slow Close - White Polypropylene
- Q&A: Do Electric Brakes Need to Share Ground Wire?
- Q&A: Where are the Ground Wires Located on Electric Trailer Brakes
- Q&A: Trailer Lights Work But Brakes are Not Working

