Replacement Lid Lifter and Bolts for Thule Sonic XXL Cargo Box

Question

Question:

I have a thule sonic xxl and the front hinge lid lifter snapped and the bolts fell out with the ball socket. Do you have the hinge and the bolts and hardware to mount?

asked by: Rod C

0

Expert Reply:

We have the replacement bolts for the lid lifter hinges with the part # TH24FR. For the support tube cylinder you'd need the part # TH74FR, for the lifter part # TH14936, and for the support tube spacer # TH84FR.

expert reply by: Jameson C

0

Answer 1

Hey Daniel. To replace the broken lift hinge on your Thule Sonic XXL you'll need the Replacement Lid Lifter Hinge for Thule Cargo Boxes item #TH14936, which works for both front and rear. It's recommended to replace both at the same time…

view full answer...

Answer 2

Since your struts aren't riveted to the box, you can use the Replacement Lid Lifter Hinge for Thule Cargo Boxes #TH14936 as a replacement.

view full answer...

Answer 3

Hey Dave. To replace the hinges that connect the lid to the base on a Thule Force XT you'll need two of the Replacement Lid Lifter Hinge for Thule Force XT XL Rooftop Cargo Boxes item #TH93VA. How did your cargo box get damaged?

view full answer...

Answer 4

Hey Qhua. The Replacement Lid Lifter Hinge for Thule Force XT XL and XXL Rooftop Cargo Boxes item #TH93VA will replace both the front and rear hinge. We do not have the pn 1500054110 for the rear. What happened to your hinges?

view full answer...

Answer 5

Removing the old lid lift to install the new one part #TH14936 really is just a matter of pulling and prying old one off to then press on the new one.

view full answer...

Answer 6

The difference between the Thule hinges or struts #TH14936 and #TH14933 is the spring tension. Both of these hinges will work for your Sears X Cargo Sport 20 lid. However, the #TH14936 includes better springs.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement Lid Lifter and Bolts for Thule Sonic XXL Cargo Box

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching