Picking MorRyde CRE 3000 for 2021 Forest River Salem 263BHXL

Question

Question:

I have a a 2021 forest river Salem 263bhxl and was looking at the cre 3000 morryde equalizer, was wondering which one I need. Thanks.

asked by: Karl S

0

Expert Reply:

You'll have to measure the distance between your trailer axle centers to determine which MorRyde CRE 3000 you'd need. You'd want the part # MR27ZR if you have 35 inches between axles or part # MR87ZR if you have 33 inches between them.

expert reply by: Jameson C

0

Answer 1

Welcome back Bill! The Timbren Trailer Suspension Enhancement System for Spring Over Axle Configurations item #T46GR does not raise the trailer height. It is designed to maintain your trailer's factory ride height when it's empty and stop…

view full answer...

Answer 2

Hey Charles, the distance between the bolt holes on center on the Timbren kit part #T46GR is 3-1/4 inch by 3 inch. The plate thickness is 3/8 of an inch. This will work with 1-3/4 inch wide leaf springs.

view full answer...

Answer 3

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 4

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 5

If your tires are in good shape and don't have any bulges, the easiest way to determine if you have a bent spindle is to take a straight edge that is longer than the tire and lay it across the tire making sure it is parallel with your trailer…

view full answer...

Answer 6

Assuming your tires are in good shape without any bulges the easiest way to determine if you have a bent spindle is to take a straight edge that is longer than the tire and lay it across the tire parallel with your trailer frame and then measure the…

view full answer...

Answer 7

I'd be happy to help you out, John! To replace the brakes on your 5th wheel trailer you need the etrailer Electric Trailer Brakes #AKEBRK-7-SA which come with a self-adjusting feature so once you initially set them up you won't have to adjust…

view full answer...

Answer 8

The upgraded equalizer kit I recommend for you is the E-Z Flex Heavy Duty Rubber Suspension System part #K71-652-00 which will be an exact fit for the 5-3/4" long equalizers that you have now. The E-Z Flex Heavy Duty Rubber Suspension System are…

view full answer...

Answer 9

Lippert has been transitioning from the old school yellow paint to the new blue pain on the Road Armor Equalizers #LC696740 so you'll be getting blue. With that said color doesn't matter, and instead you need to worry about using the right…

view full answer...

Answer 10

Hey Frank, the part #K71-652-00 is close enough to what you are needing to work great. The biggest dimension to get exact is the left to right bolt hole center dimension that you mentioned which this is exactly the same as you can see in attached…

view full answer...

Answer 11

Yes, you can use the Dexter E-Z Flex Suspension Kit #K71-652-00 with 31 inch axle spacing because these equalizers are a match for your current Equalizer #TREQ104. We have contacted Dexter about this previously and so long as the equalizers are the…

view full answer...

Answer 12

Despite what the manufacturers of these equalizers say, the axle/wheel spacing isn't the right way to figure out the best fit for upgraded equalizers, including the MORryde CRE3000. The wheel spacing is more of a guideline, so to determine the…

view full answer...

Picking MorRyde CRE 3000 for 2021 Forest River Salem 263BHXL

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching