Result: x factor

Hey John! The Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box #GY37ND is not Lippert approved yet. This is designed to replace a pin box with a Lippert Rhino bolt pattern, and is the same exact length as the factory pin box. Gen-Y does stand behind…

Hey Steve, It looks like you may need an offset gooseneck ball to give you more clearance in the rear, and give you some lift off of the bed. WE do have a 4" offset for that B and W gooseneck hitch #BWGNXA4685. That will move it back to give you…

It sounds like you installed leaf springs that weren't the correct length for your setup. Looking at your equalizer it looks like your springs are too long. The simplest solution would be to have your front and rear suspension hangers removed and…

On the Lippert Trailair Air Ride 5th Wheel King Pin, #LC179879, king pin center to the first row of mounting bolt holes measures 9 inches, center king pin to last row of mounting bolt holes measures 16-7/8 inches. If you look at the diagram I…

The Trailair Air Ride 5th Wheel Pin Box - Lippert 1116 - 21,000lbs Item #LC155943 has two different placements when installing but as you can see in the attached dimension spreadsheets it has an overall height of 17-7/16" whereas the Trailair…

The RV Shower Panel #WAY72YR uses standard connection sizes to hook up to the existing water inlets for your shower and the body of the panel is 51" Tall x 5-5/8" Wide to cover up the holes left by your old shower faucet. To confirm that…

I can certainly point you in the right direction. We do have the #e22YR which is a 26" long 2,000 lb leaf spring. We also have the #e44SR which is a 25-1/4" long 2,500 lb spring. When replacing old leaf springs, it is critical that the…

Well you've reached out to the right place, Kaivon - I'd be happy to help you navigate upgrading your trailer suspension! All three of those suspension kits you asked about are great, but my recommendation is using the MORryde Rubber…

The tallest spring hangers we have in a 9/16 eye diameter are the Redline item #E4139 you were looking at. If you want to go to the 5 7/16 inch hanger you were referencing you will need to upgrade to 3/4 eye diameter leaf springs. If you decide to…

If you are going to install two of the MORryde X-Factor Crossmembers #MR33WR on your tandem axle trailer Alan you would want to install them on the front and rear hangers. You can install a third one if you want on the middle hanger as well for even…

For 1/2 inch trailer u-bolts that attach to axle the recommended torque value is between 45 and 70 ft lbs of torque.

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…