bing tracking image
  1. Trailer Suspension Parts
  2. Timbren
  3. Leaf Spring Enhancement System
  4. Boat Trailer
  5. Camper
  6. Car Hauler
  7. Snowmobile Trailer
  8. Utility Trailer
Timbren Trailer Suspension Enhancement System for Spring Over Axle Configurations - 5,000 lbs
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Timbren

Timbren Trailer Suspension Enhancement System for Spring Over Axle Configurations - 5,000 lbs

Part Number: T46GR
In Stock
$302.59
Retail:$468.32
You Save: $165.73
Trailer Suspension Parts
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Designed for trailers with spring over axle configurations that have a 2-3/8" to 3" diameter. Hollow rubber springs sit above the axle, helping to stabilize and level the trailer while absorbing road shock and reducing sway. Great Prices for the best trailer suspension parts from Timbren. Timbren Trailer Suspension Enhancement System for Spring Over Axle Configurations - 5,000 lbs part number T46GR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1)
  • Q & A (0)
  • Photos

Timbren Trailer Suspension Parts - T46GR

Highlights

  • Supports up to 5,000 lbs: Adds load capacity for smoother, safer towing under heavy weight.
  • For 2-3/8" to 3" Axles: Fits spring-over setups to stabilize the trailer and reduce sway.
  • 6-1/4" Tall Hollow Rubber Springs: Absorb road shock for a level, cushioned ride.
  • Works Independently Side-to-Side: Balances off-center loads and lessens body roll in turns.
  • Raises Trailer Ride Height: Helps restore level stance and reduces strain on hitch parts.
  • Includes Mounting Brackets & Hardware: Bolts to existing 2"-wide leaf springs using U-bolts.

Features to know about

Steady Ride with Heavy Loads: 5,000 lb Rubber Spring Support

Hauling heavy gear can cause sag and sway that wear out your suspension fast. This system adds 5,000 lbs of extra support using two hollow rubber springs that mount above your 2-3/8" to 3" diameter axle. As weight increases, the rubber springs compress and stiffen to keep the trailer level and stable. The added resistance raises the trailer’s ride height and helps take strain off your hitch components for an easier pull under load.

Trailer rear suspension sagging under heavy load before installing Timbren Suspension Enhancement System

Side-by-side comparison of loaded trailer with and without Timbren Suspension Enhancement System showing improved leveling

Trailer swaying on the road without Timbren Suspension Enhancement System installed

Smooth Handling on Rough Roads: Progressive Rubber Springs Absorb Shock

Rough pavement or washboard roads can toss your trailer around, but these hollow rubber springs work like built-in shock absorbers. They flex under light loads for a comfortable ride, then firm up as weight builds, cushioning bumps and keeping everything steady. The progressive design keeps the trailer tracking straight and reduces the bounce that can shift cargo or loosen fasteners inside.

Animated diagram showing compression of Timbren rubber spring with progressive resistance

Better Control in Turns and Crosswinds: Independent Action Reduces Body Roll

When turning or swerving, uneven loads can make one side dip or roll. Each rubber spring works independently to support its side of the trailer, cutting body roll and improving handling in corners or when passing big rigs in gusty wind. The result is more confident control over every mile.

Timbren suspension system reducing trailer body roll during cornering or uneven loading

Simple Fit for Spring-Over Configurations: Installs with Existing U-Bolts

This kit is built for trailers with spring-over-axle setups that use 2" wide leaf springs. It bolts right into place using existing U-bolts and includes mounting brackets and hardware—no major modifications needed. The bracket positions each spring about 1" above the axle so your original suspension moves freely under lighter loads while the rubber springs take over as weight increases.

Installed Timbren hollow rubber springs above trailer axle showing one-inch clearance for proper suspension function

Longer Suspension Life: Works with Your Existing Springs

The system doesn’t replace your factory leaf springs—it works with them. By taking the brunt of bumps and jolts, it protects bushings, shackles, and hangers from excessive wear. That means fewer suspension repairs down the line and a smoother ride season after season.

Specs

Application

  • Configuration: Spring over axle trailer configuration
  • Axle Diameter: 2-3/8" - 3"
  • Axle Type: Tandem axle applications require 2 kits
  • Suspension System Requirement: Designed to work with a suspension system that is in good working order

Installation

  • Mounting Method: Installs with existing U-bolts
  • Mounting Location: Secures to leaf springs
  • Leaf Spring Width: 2" wide
  • Included Components: 2 Hollow rubber springs, mounting brackets and hardware

Capacity

  • Weight Capacity: 5,000 lbs
  • Load Limit Warning: Do not exceed the trailer's weight-carrying capacity

Dimensions

  • Spring Height: 6-1/4" tall

Warranty

  • Warranty Type: Limited lifetime warranty - satisfaction guarantee

TRAAL - Trailer Suspension Enhancement System with Aeon Hollow Rubber Springs by Timbren - Spring Over Axle





Ratings & Reviews

5.0

1 reviews
Review sort icon
Designed for trailers with spring over axle configurations that have a 2-3/8" to 3" diameter. Hollow rubber springs sit above the axle, helping to stabilize and level the trailer while absorbing road shock and reducing sway.

by:


1
1

See what our Experts say about this Timbren Trailer Suspension Parts

  • Does the Timbren Trailer Suspension Enhancement System T46GR Raise Ride Height?
    Welcome back Bill! The Timbren Trailer Suspension Enhancement System for Spring Over Axle Configurations item # T46GR does not raise the trailer height. It is designed to maintain your trailer's factory ride height when it's empty and stop sagging in your suspension only under a heavy load. The Timbren Trailer Suspension Enhancement System item # T46GR is designed for trailer's where the axle is mounted below the leaf springs. It works with 2-3/8" and 3" diameter axles up to a 5,000 lbs...
    view full answer...
  • Bolt Hole Dimensions of Timbren Suspension Enhancement T46GR
    Hey Charles, the distance between the bolt holes on center on the Timbren kit part # T46GR is 3-1/4 inch by 3 inch. The plate thickness is 3/8 of an inch. This will work with 1-3/4 inch wide leaf springs.
    view full answer...
  • Could Timbren Trailer Suspension T46GR Fit with Roadmaster Comfort Ride
    Hey Charles, I am sure there is a way to allow the Timbren suspension kit part # T46GR with the Roadmaster Comfort Ride system but we've never had the two tested together to verify that for sure. I would assume it wouldn't be too difficult though since it's basically just a matter of attaching to the u-bolt plate.
    view full answer...
  • Recommended SumoSprings And Timbren Jounce Springs For A 2021 Grand Design Reflection 337RLS
    Hi Ryan, If your leaf springs sit on top of your axles then you'll need the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket # SS26MV. If your leaf springs sit below the axles then you'll need the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket # SS33HR. Timbren does offer a few different options for leaf spring suspensions but you won't be able to use both the SumoSprings and Timbrens because they both mount in the same spot. If your leaf springs sit on top...
    view full answer...
  • Timbren Suspension Enhancement that Can Fit Trailer
    You could use a Timbren suspension enhancement kit like the part # T92MR for if you have underslung axles or part # T46GR for if you have over slung. These attach to the spring pack/axle and provide additional support. Your axle would need to be between 2-3/8 inches and 3 inches in diameter for this fit and your leaf springs would need to be 2 inches wide.
    view full answer...
  • Timbren Suspension Enhancement that Fits Trailer Suspension
    Timbren makes suspension enhancement kits for trailers like what you are looking for like with the part # T46GR for if you have a spring over axle configuration part # T92MR for axle over spring. This will give you the support you are looking for and will last a lot longer than what you tried already.
    view full answer...


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Ryan F
Written by:
Ryan F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.