Recommended Auxiliary LED Indicator Lights for Curt Cargo Carriers and Bike Racks

Question

Question:

Looking for part c53201

asked by: Jerry

0

Expert Reply:

It sounds like you're looking for the Curt Auxiliary LED Indicator Lights, which are available with part # C53201. These can be used on the back of Curt cargo carriers or bike racks.

I've linked a review video of these, as well.

expert reply by: Erik B

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…

view full answer...

Answer 5

Thank you for your purchase of the Kuat NV 2.0 Bike Rack #NV22G! When it comes to lighting I have an alternate solution to what you're asking with the following parts: Curt Auxiliary LED Indicator Lights - #C53201 Thule License Plate Holder for…

view full answer...

Answer 6

Hey Mike, for a bike cover to use with the Thule Thule Elite Van XT 2 Bike Rack #TH302013 that you referenced I would go with the Swagman Bike Cover for RVs #S24FR that will fit well and offer great protection. Are you planning a big trip with your…

view full answer...

Answer 7

Hey Curtis! Yes, the etrailer Trailer Hitch Receiver #e98845 comes with the fishwire/bolt leader. All of the hardware pictured below, including the fishwire, will come with the trailer hitch. This is confirmed to fit your 2018 Dodge Journey. Do you…

view full answer...

Answer 8

Thanks for reaching out! To add tail lights and a license plate to your Kuat NV 2.0 Bike Rack #NV22G I recommend picking up the Curt Auxiliary LED Indicator Lights #C53201 and the Thule License Plate Holder #TH35JV - you'll need to splice in the…

view full answer...

Answer 9

To add lights to your Thule EasyFold XT Bike Rack #TH903202 I recommend checking out the Curt Auxiliary LED Indicator Lights #C53201. These use adhesive to stick to the rack and have connectors to a 4-Way flat plug for the basic lighting functions.…

view full answer...

Answer 10

Hi Allen; based on the picture you sent the Zeal light kit you were looking at doesn't require an additional ground wire. All you have to do is mount the lights somewhere and plug it into the 4-way. Also, I wouldn't try to rig up something…

view full answer...

Recommended Auxiliary LED Indicator Lights for Curt Cargo Carriers and Bike Racks

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching