Installation of Curt C13397 Class III Trailer Hitch on 2020 Honda CR-V

Question

Question:

Im looking at purchasing Item # C13397. Does eTrailer provide or partner with anyone to do local installations in Albuquerque, NM? Or would a self-installation be the only option? Thanks!

asked by: Matthew C

0

Expert Reply:

We don't have any specific recommendations for installers in your area, but any trusted mechanic should be able to complete the installation for you in roughly an hour. The installation isn't super-complicated, if you're fairly proficient with hand tools, you should be able to handle the installation yourself, but I've linked to the installation instructions and to an install video that you can look over to see if this is something you'd feel comfortable attempting on your own.

Really the only specialty tool needed is a torque wrench, but most folks can borrow one from a friend or neighbor or the loan a tool service from a local auto parts store.

If you'll be using the hitch for towing purposes, you'll also need a trailer wiring harness like # 118741, a ball mount # C45010 which includes the necessary hitch pin and # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball. I've also linked to an install video for the trailer wiring harness.

expert reply by: Mike L

0

Answer 1

Hey Scott, thanks for reaching out! Yes, the Curt Trailer Hitch Receiver #C13397 will fit perfectly fine on your 2025 Honda CR-V Hybrid Sport. What are you planning on using the hitch receiver for?

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

The available trailer hitches for your 2019 Honda CR-V can be pretty easily categorized into hidden and non-hidden groups. I highly recommend going with a hidden-crosstube hitch, especially on a new vehicle like yours, as this is going to create a…

view full answer...

Answer 10

Hey Frank! This is a newer product, so there aren't many long-term owner reviews available yet. That said, we have done extensive testing on the Benton MoveHitch #B86VR. A strain gauge was used to measure the forces the carrier experiences during…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Installation of Curt C13397 Class III Trailer Hitch on 2020 Honda CR-V

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching