Trailer Running Lights Not Functioning with a 2007 Dodge Ram Pickup
Updated 09/23/2020 | Published 09/22/2020
Question:
I have a 2007 Dodge 2500 with the 5.9 diesel. I just purchased a trailer and discovered the running lights on the trailer weren’t functioning. The brake and turn signal lights were however functioning. Any guidance on troubleshooting, correcting this problem?
asked by: Andrew
Expert Reply:
There are a couple of things we can do to troubleshoot malfunctioning wiring on your 2007 Dodge Ram Pickup. I've linked to an article about troubleshooting your wiring issues below.
If the turn and brake lights are working but the running lights are not, then the first and easiest thing to do is to check your fuses. The 2007 Ram has an integrated power module that houses its fuses. It's right next to the battery. Check cavity number 15 (it's a 20 amp yellow fuse) for the trailer running lights. If that fuse is blown, you need to replace it.
If that is okay, then another easy thing to do is clean the vehicle and trailer grounding locations (typically a white wire). If there is any corrosion or paint getting in the way of the contact area, then there won't be sufficient power going through the system, which can cause malfunctioning. Be sure to check for a clean connection area (avoiding paint or rusted areas) for your ground. Move them to better spots if need be.
If that doesn't solve the problem, then the next thing to do is test the wiring harness with a circuit tester like the Hook Probe, part # PTW2993. I've linked to a video review of this tester that demonstrates how to do this. Depending on whether or not your Pickup has a factory-installed 7-way or an aftermarket 4-way pole, you'll need to determine which wire to test. Generally (though not always), a 4-pole has a brown wire for its running lights.
If everything checks out up to this point and the running lights are still not working, then the problem is with the trailer wiring. To find the exact point, you may need to trace the wires on the trailer side and look for any places where the ground wire is exposed and making contact with the trailer frame, which would "ground the wire out," causing it to malfunction. If you find any splits or frays on one of the wires, then you will need to replace that wire.
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: tekonsha p2
- Search Results: trailer brakes
- Search Results: tekonsha p3
- Shop: Brake Controller
- Search Results: trailer axle
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Video: What to Know About the Curt TriFlex NEXT Trailer Brake Controller
- Shop: Curt TriFlex NEXT Trailer Brake Controller w/ Custom Harness - 1 to 4 Axles - Proportional
- Shop: Trailer Wiring
- Shop: Vehicle Tow Bar Wiring
- Shop: Redarc Tow-Pro Link Bluetooth Brake Controller - Off-Road Mode - 4 Axles - Proportional
- Shop: Pollak Trailer Connector Adapter - 7-Blade Plug to 7-Pole Round Pin - Die-Cast Zinc
- Shop: Mighty Cord 7-Way RV Style Trailer Connector w/ Molded Cable - Trailer End - 8' Long
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Shop: Blue Ox EZ Light Custom Plug-In Tow Bar Wiring Kit
- Shop: Tire Chains
- Q&A: Activating 7-Way 12 Volt Accessory Circuit on 2007 Dodge Ram 2500
- Shop: Titan Chain Heavy Duty Tire Chains w Cams - Ladder Pattern - Square Link - Assisted Tension - 1 Pair
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: How to Choose a Trailer Brake Controller
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer wiring
- Search Results: trailer tires and wheels
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Suspension Enhancement
on Automotive Tools
