Customers compare AM20783 to these similar products
Products Featured in this Video
Hello everybody, this is Jeff at "etrailer.com". Today I'm gonna take a look at the Dexstar 16 inch by 6 inch dual wheel, with the 5 and a half inch offset. Has an 8 on 6 and a half inch bolt pattern. Now this wheel is a dual wheel, that can be used as either an inner wheel in this position, or if you turn it around as an outer wheel, on your truck or your trailer. And depending on which way… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Videos
Help Articles
Expert Answers
We have a couple of options for spare wheels that may work on your Coachmen Leprechaun. You will want to measure the pilot hole of one of the rims currently on your motorhome to determine which one will work for you. 4.75 Pilot Hole - Dexstar Dual…
view full answer...Looks like Maxion/Vesper wheels like the #TA56FR are made in Turkey whereas Dexstar trailer wheels are made in USA.
view full answer...As long as the maximum load applied to the #MX59FR Maxion Vesper 16 x 6 wheel doesn't exceed its 4460 lb capacity, the wheel can handle the pressure of any tire that can be mounted on it, which I confirmed with the manufacturer.
view full answer...The difference between the two rim designs you mentioned is just a visual difference. The mini mod wheels are a white rim that have small circles that run around the mounting flange of the rim whereas the other white style you referenced has…
view full answer...The MTI number on your 8-201 hubs is simply a casting number. It does not indicate any information about the hubs or have anything to do with the actual part number. I'm not surprised to hear you have different outer bearings between the two…
view full answer...All available 16-inch trailer wheels with the 6-on-5-1/2 bolt pattern, such as Dexstar #AM20741 that you referenced, can be seen on the link provided. Most of these wheels are rated for 3050-lbs at 90-psi pressure. Part #AM22657 from Americana is…
view full answer...We can get you pretty close to what you are looking for, but for a 16 inch tire, the highest load capacity is the Provider ST235/85R16 Radial Trailer Tire - Load Range G #TTWPRG235R16 which has a 4,400 lb capacity (per tire) when inflated to its max…
view full answer...The total backspacing for the Taskmaster Steel Dual Trailer Wheel, part #TTW660865SDX2C is 8.85 inches front he front of the mounting surface to the back of the rim on the wheel. This is a 16-inch x 6-inch wheel with an 8on 6-1/2 bolt pattern. The…
view full answer...You need the Wheel Retaining Ring #33-52-1 for your 10K axles and wheels. This ring has the single tab and will allow you to use your current flat faced wheel with Coned Lug Nuts #6-109. The retaining ring will sit outside the the wheels(see image).…
view full answer...Most trailer wheels have a zero offset. This is because a zero offset allows the wheel to handle the maximum load by distributing the the load equally to both sides of the wheel. To determine if your trailer wheels have an offset, you will want to…
view full answer...Hi John; I don't know exactly what is on your 2014 Thor Freedom Elite 28H but the Vesper Steel Dual Trailer Wheel #MX89FR matches everything you gave me. The only thing you would need to do is check the offset and see if it matches at…
view full answer...The importance of matching a wheel's pilot hole diameter to the part of the hub that fits through it depends on the type of wheel. A hub-centric wheel uses the pilot hole to center the wheel on the hub and also to bear some of the total weight…
view full answer...