Anchor Relocation Kit that Can be Used with Torklift Tie Downs for Better Fender Clearance

Question

Question:

Truck is 2019 RAM 3500 dually 8foot box. Measured distance from front of 2018 Bigfoot 25C10.4 to the rear anchor points is 89. Rear Fastguns clear the dually fenders just fine, but front fastguns are just about touching the front of the fender flair. Can the Kit be used to provide a better fit for just the front Fastguns ?

asked by: Steve Y

0

Expert Reply:

Yes the TorkLift Camper Anchor Relocation Kit # TLA7004 that you referenced was designed specifically for what you are looking for. It relocates the attachment point to an area that allows more clearance.

expert reply by: Jameson C

0

Answer 1

Hello Ken, thanks for reaching out. Sounds like you are on the right track here because the type of running boards on your truck do dictate which tie downs to use. You are also correct that you will not be able to use the tie downs from your old 2002…

view full answer...

Answer 2

Hey Charlie! Looking at your picture it doesn't look like you have any running boards. I'm also assuming you have the factory hitch, is that correct? If so, the tie-downs for your 2024 Ram 3500 are the TorkLift Tie Downs - Custom Frame Mount…

view full answer...

Answer 3

The Torklift #TLA7004 Camper Anchor Relocation Kit does not require drilling into the camper or the truck. The adapter brackets would be attached to the camper by drilling holes at the location of the original anchor point, as shown in the photo…

view full answer...

Answer 4

If your 2014 Ram 2500 Crew Cab 8 foot bed has factory installed hitch and step boards the Torklift front tie downs #TLD2127 and rear #TLD3109 will clear your steps as long as they are not aftermarket Mopar rear-mounted kick out steps that are mounted…

view full answer...

Answer 5

Hello Michael. The Torklift Tie Down Set #TL82DR is what I recommend for your 2012 Ram 2500 long bed. This kit comes with both the front and rear tie downs. It is important to note that these tie downs are intended for trucks without steps or running…

view full answer...

Answer 6

I would be happy to help! Lets start with the extender. The extender you will need to add an additional hitch to use in conjunction with the factory hitch on your 2017 Ram 3500 DRW, as the highest rated extension compatible with it maxes out at…

view full answer...

Answer 7

Good question but the frame-only portion is not available as a separate purchase; you do have to get the entire part, the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLF4007.

view full answer...

Answer 8

The Brophy Clamp On Camper Tie-Downs #HSAB typically are not a fit for dual rear wheels since they angle down closely to the body of the truck. With dual rear wheels your fenders stick out quite a bit eating into the space where the #HSAB would sit.…

view full answer...

Answer 9

For your 2011 Ram 3500 Dually, if you have the 6-1/2 foot bed, you will need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLD2120 and Rear #TLD3109. If you have an 8 foot bed then you will want Front #TLD2115 and Rear #TLD3109. These…

view full answer...

Answer 10

We have tie-downs that are compatible with the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2"#TLD1102 that fits your 2011 Dodge Ram 3500, though Rear Tie-Downs #TLD3109 are not. The tie-downs compatible with the…

view full answer...

Answer 11

Hi Mark; there may be some TorkLift tie-downs compatible with those running boards but it depends on your total configuration. For example, you can use the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL66PR if you have the 8' bed…

view full answer...

Answer 12

Installation of the TorkLift Camper Anchor Relocation Kit #TLA7004 for your dually truck will require drilling into the adapter bracket in order to attach it to the camper's rear anchor point but you will not need to drill into your camper…

view full answer...

Anchor Relocation Kit that Can be Used with Torklift Tie Downs for Better Fender Clearance

Product Page this Question was Asked From

Continue Researching