Can You Get Frame-Only Part of TorkLift Tie-Downs TLF4007

Question

Question:

Can I buy just the torque lift tie down part that attaches to the truck frame? Or do I have to buy the extender piece, too?

asked by: Jeff S

0

Expert Reply:

Good question but the frame-only portion is not available as a separate purchase; you do have to get the entire part, the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF4007.

expert reply by: Kyle S

0

Answer 1

For your 2011 Ram 3500 Dually, if you have the 6-1/2 foot bed, you will need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLD2120 and Rear #TLD3109. If you have an 8 foot bed then you will want Front #TLD2115 and Rear #TLD3109. These…

view full answer...

Answer 2

Hello Michael. The Torklift Tie Down Set #TL82DR is what I recommend for your 2012 Ram 2500 long bed. This kit comes with both the front and rear tie downs. It is important to note that these tie downs are intended for trucks without steps or running…

view full answer...

Answer 3

The Brophy Clamp On Camper Tie-Downs #HSAB typically are not a fit for dual rear wheels since they angle down closely to the body of the truck. With dual rear wheels your fenders stick out quite a bit eating into the space where the #HSAB would sit.…

view full answer...

Answer 4

Yes the TorkLift Camper Anchor Relocation Kit #TLA7004 that you referenced was designed specifically for what you are looking for. It relocates the attachment point to an area that allows more clearance.

view full answer...

Answer 5

The Torklift #TLA7004 Camper Anchor Relocation Kit does not require drilling into the camper or the truck. The adapter brackets would be attached to the camper by drilling holes at the location of the original anchor point, as shown in the photo…

view full answer...

Answer 6

I would be happy to help! Lets start with the extender. The extender you will need to add an additional hitch to use in conjunction with the factory hitch on your 2017 Ram 3500 DRW, as the highest rated extension compatible with it maxes out at…

view full answer...

Answer 7

We have tie-downs that are compatible with the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2"#TLD1102 that fits your 2011 Dodge Ram 3500, though Rear Tie-Downs #TLD3109 are not. The tie-downs compatible with the…

view full answer...

Answer 8

If your 2014 Ram 2500 Crew Cab 8 foot bed has factory installed hitch and step boards the Torklift front tie downs #TLD2127 and rear #TLD3109 will clear your steps as long as they are not aftermarket Mopar rear-mounted kick out steps that are mounted…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hey Jim welcome back. To determine if you need the TorkLift Camper Anchor Relocation Kit item #TLA7004, you'll have to take a measurement. You'll want to measure from the front bumper of your Palomino HS2902 to the center of the rear anchor…

view full answer...

Can You Get Frame-Only Part of TorkLift Tie-Downs TLF4007

Product Page this Question was Asked From

Continue Researching