Installation Instructions of Front Bags on 2003 Itasca SunCruiser on Workhorse W22 Chassis

Updated 07/31/2020 | Published 07/29/2020

Question:

I have a 2003 Workhorse w22 Itasca SunCruiser, Im installing a set of AL88101 AirBags on the front of the rig. The question is do I install them where the existing Jounce bumper are located? I found a YouTube video showing a install on a 2007 Bounder and it does show them being removed and the bags installed where they were located.

asked by: Wayne R

Expert Reply:

When installing the AirLift # AL88101 you do not need to remove the factory jounce bumpers and they will not be installed in the same place. You will want the air bags to install forward of the axle and your stock jounces should be behind the axle. Additionally, because of their size, the AirLift bags will engage before the stock jounces so they can be removed if you desire.

expert reply by: Erik B