Recommended SumoSprings For 2012 Tiffin Allegro 32CA Motorhome On F53 Chassis with 22K GVWR

Question

Question:

I need correct P/N for Sumo springs. Front and Rear. Ford F53 chassis, 22000 #, Tiffin Allegro 32CA. Your online search recommends SSF-171-40-2 for the front but then tells me it will not work on a Tiffin product. Help please.

asked by: ALAN L

0

Expert Reply:

For the front axle I recommend the SumoSprings Rebel Custom Helper Springs # SSF-170-40-2. These springs have a 3,000 lb weight capacity at 50% compression. Fits the 2008 to 2017 F53 Tiffin models. Looks like the part # SSF-171-40-2 is for the earlier model years 2004 to 2007.

For the rear axle, the springs I recommend are SumoSprings Maxim Custom Helper Springs part # SSR-180-54-1. These springs have a 7000 lb weight capacity at 50% compression.

I have attached a link to a couple of installation videos for these springs on an F-53 motorhome you can check out.

expert reply by: Jeff D

0

Jeff D.

7/20/2020

For the front axle I recommend the SumoSprings Rebel Custom Helper Springs # SSF-170-40-2. These springs have a 3,000 lb weight capacity at 50 per cent compression. Fits the 2008 to 2017 F53 Tiffin models. Looks like the part # SSF-171-40-2 is for the earlier model years 2004 to 2007. For the rear axle, the springs I recommend are SumoSprings Maxim Custom Helper Springs part # SSR-180-54-1. These springs have a 7000 lb weight capacity at 50 per cent compression. I have attached a link to a couple of installation videos for these springs on an F-53 motorhome you can check out.

Jeff D.

7/20/2020

For the front axle I recommend the SumoSprings Rebel Custom Helper Springs # SSF-170-40-2. These springs have a 3,000 lb weight capacity at 50 per cent compression. Fits the 2008 to 2017 F53 Tiffin models. Looks like the part # SSF-171-40-2 is for the earlier model years 2004 to 2007. For the rear axle, the springs I recommend are SumoSprings Maxim Custom Helper Springs part # SSR-180-54-1. These springs have a 7000 lb weight capacity at 50 per cent compression. I have attached a link to a couple of installation videos for these springs on an F-53 motorhome you can check out.

Jeff D.

7/20/2020

For the front axle I recommend the SumoSprings Rebel Custom Helper Springs # SSF-170-40-2. These springs have a 3,000 lb weight capacity at 50 per cent compression. Fits the 2008 to 2017 F53 Tiffin models. Looks like the part # SSF-171-40-2 is for the earlier model years 2004 to 2007. For the rear axle, the springs I recommend are SumoSprings Maxim Custom Helper Springs part # SSR-180-54-1. These springs have a 7000 lb weight capacity at 50 per cent compression. I have attached a link to a couple of installation videos for these springs on an F-53 motorhome you can check out.

Jeff D.

7/20/2020

For the front axle I recommend the SumoSprings Rebel Custom Helper Springs # SSF-170-40-2. These springs have a 3,000 lb weight capacity at 50 per cent compression. Fits the 2008 to 2017 F53 Tiffin models. Looks like the part # SSF-171-40-2 is for the earlier model years 2004 to 2007. For the rear axle, the springs I recommend are SumoSprings Maxim Custom Helper Springs part # SSR-180-54-1. These springs have a 7000 lb weight capacity at 50 per cent compression. I have attached a link to a couple of installation videos for these springs on an F-53 motorhome you can check out.

See All (4) Replies to Jeff D. ∨

Answer 1

The jounce springs I recommend for your two wheel drive 2019 Ford F-53 chassis are from SumoSprings, the SumoSprings Rebel for the front axle and SumoSprings Maxim for the rear axle. The reason why the SumoSprings are the best is because they not…

view full answer...

Answer 2

The SumoSprings Maxim Custom Helper Springs #SSR-180-54-1 for the rear axle on your 2016 Fleetwood Bounder 35K do not require drilling. SumoSprings are an excellent choice for suspension enhancement because there is no maintenance. You install them…

view full answer...

Answer 3

You can install a front set of SumoSprings on your 2019 Jayco Precep 29V if you wanted first with the part #SSF-170-40-2. It will give you improved handling and stability and then for the rear then #SSR-180-54-1 and you'd be set. Having the front…

view full answer...

Answer 4

If you wanted to install SumoSprings on your 2017 Fleetwood Bounder built on a Ford F-53 that are designed for the higher GVWR chassis you could but you should note that it would probably give you a harsher ride quality than you'd want. For GVWR…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Answer 10

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 11

Hey Kevin, yes we have the SumoSprings kit part #SS46KJ that is a fit for your 2025 Chevrolet Silverado 2500 HD. This is the medium density foam spring provides 2,800-lb support capacity at 50% compression and also requires no drilling for install!…

view full answer...

Answer 12

Hi Bill! Thanks for your pictures, they were extremely helpful! ^___^ The LCI Part #194170 on that tag you found means you have a 1621 pin box. The Gen-Y #GY45SR you were looking at is specifically for the Lippert 1116 and 1716 pin boxes, so you will…

view full answer...

Recommended SumoSprings For 2012 Tiffin Allegro 32CA Motorhome On F53 Chassis with 22K GVWR

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching