Can Just Front or Rear SumoSprings Install on 2019 Jayco Precep 29V

Question

Question:

I am looking at installing sumo springs on my 2019 Jayco Precep 29v on a F53 chassis Because of the cost I would like to install the fronts first and at a later date install the rears Would this be ok to do and will I notice any difference in handling, or should I just bite the bullet on do both front and rear at the same time Also will I notice in side to side sway while driving. Thanks

asked by: Joe

0

Expert Reply:

You can install a front set of SumoSprings on your 2019 Jayco Precep 29V if you wanted first with the part # SSF-170-40-2. It will give you improved handling and stability and then for the rear then # SSR-180-54-1 and you'd be set. Having the front and rear done at same time will give you the best ride quality but if you did the front or the rear separately you'd be fine and see improvements. If I was to recommend doing one or the other first I would recommend the rear first as that's where you'll see the biggest improvement.

expert reply by: Jameson C

0

Answer 1

For the front axle I recommend the SumoSprings Rebel Custom Helper Springs #SSF-170-40-2. These springs have a 3,000 lb weight capacity at 50% compression. Fits the 2008 to 2017 F53 Tiffin models. Looks like the part #SSF-171-40-2 is for the earlier…

view full answer...

Answer 2

Installing the rear anti-sway bar, part #RM-1139-145 on your 20,500 lb GVWR motorhome (or part #RM-1139-149 for a 22,000 lb GVWR) does not require removal of the factory sway bar you have. These Roadmaster sway bars are designed to support your stock…

view full answer...

Answer 3

The SumoSprings Maxim Custom Helper Springs #SSR-180-54-1 for the rear axle on your 2016 Fleetwood Bounder 35K do not require drilling. SumoSprings are an excellent choice for suspension enhancement because there is no maintenance. You install them…

view full answer...

Answer 4

The jounce springs I recommend for your two wheel drive 2019 Ford F-53 chassis are from SumoSprings, the SumoSprings Rebel for the front axle and SumoSprings Maxim for the rear axle. The reason why the SumoSprings are the best is because they not…

view full answer...

Answer 5

If you wanted to install SumoSprings on your 2017 Fleetwood Bounder built on a Ford F-53 that are designed for the higher GVWR chassis you could but you should note that it would probably give you a harsher ride quality than you'd want. For GVWR…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

Hello Dan, Great question. When you’re comparing the Firestone kits #F59VV and #F2582, they both technically fit your 2025 F-150, but they are designed around different mounting locations and truck configurations. The #F2582 is the traditional…

view full answer...

Answer 11

Hey Jeff, I would strongly recommend the SumoSpring kit part #SS96EV for your 2025 Nissan Frontier. This will give you the support you are looking for without causing the ride quality to be overly harsh which the Timbrens are known to do. Install is…

view full answer...

Answer 12

Hey Fernando, I'd be happy to help you pick out the correct Timbren rear suspension kit for your 2023 Toyota Tacoma TRD that will be towing a trailer. Really it comes down to two options. You would want the part #TTORTUN4L for if you have the 3…

view full answer...

Can Just Front or Rear SumoSprings Install on 2019 Jayco Precep 29V

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching