Replacement Toilet Lid for Dometic 506 Vacuflush Toilet

Question

Question:

My measurement are 14 by 15 1/4

asked by: Jeff

1

Helpful Expert Reply:

Thanks for the pictures of your 500 series Dometic RV toilet. The part # DOM85FR you referenced will fit and work great as an exact replacement.

expert reply by: Jameson C

1

click to enlarge

Answer 1

I went out to our lot and found an RV with the Replacement Wooden Toilet Seat and Lid for Dometic Full-Timer RV and Sealand Toilets item #DOM25FR and took some measurements. The inside dimensions of the seat are 8-1/4" x 10-7/8". I have…

view full answer...

Answer 2

You are correct that the original part has been discontinued. The replacement seat #DOM25FR (385343831) is going to be your best bet. It looks like your current seat is about 14" or 14-1/2" across and about 16" long. The replacement…

view full answer...

Answer 3

I'll go ahead and list out the options for you for replacement toilet seats for Dometic RV toilets, but we have no way of knowing what toilet is any specific trailer, so you'll have to match up yours with the correct replacement. - Dometic…

view full answer...

Answer 4

The lid for the Replacement Wooden Toilet Seat #DOM83FR that fits on a Dometic 310 RV Toilet #DOM57FR tapers to be narrower at the top of the lid. So it will be slightly narrower than the seat itself. I have included dimensions that show the widest…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Replacement Toilet Lid for Dometic 506 Vacuflush Toilet

Product Page this Question was Asked From

Continue Researching