Bearing Buddy Bra for Bearing Protector on 2008 Shorelander Galvanized Boat Trailer

Question

Question:

Hello, I have a 2008 shorelandr SRV31B galvanized trailer. On one of the hubs, I am missing the rubber cover and cannot find it, even on the shorelandr parts list. Im attaching a picture of the cap I have on the other wheel to see if you can tell me what I need. Thank you.

asked by: Rob D

0

Expert Reply:

It looks like you are needing the bra for a bearing protector.

We do not carry any bras that say Shorelander on them, but Bearing Buddy makes some that would probably work for you.

Part # BB17B are 2 inch diameter, and the # BB19B are 2-1/8 inch in diameter.You would need to measure the outside diameter of your bearing protector to determine which bra is the correct one for you.

expert reply by: Mike L

0

click to enlarge

Answer 1

If the trailer tongue in question is 3-1/2 inches round then you can use Bulldog coupler #BD028383. If you have a square or rectangular tongue then a 3-1/2 inch wide straight coupler is not available. You may be able to use a channel bracket like…

view full answer...

Answer 2

All of that is not necessary. All you have to do is lock out the surge coupler so it cannot move in and out or disconnect the brake lines. By removing the old coupler you would have to remove the brake lines any way. A surge coupler can still be used…

view full answer...

Answer 3

According to Shorlandr, your SLR22L trailer uses hubs with a L44649 inner and outer bearing. The #CE13511 hub you mentioned uses a different inner bearing, so it won't work for you. The good news is that the #CE13311 is the correct hub, assuming…

view full answer...

Answer 4

You can use sway control only with an adjustable ball mount in one of two ways. First, you could use sway control bracket #RP26003 which will fit a ball mount platform up to 2.610 inches wide. It also has a 1 inch diameter hitch ball hole. The other…

view full answer...

Answer 5

In order to switch from slipper to double eye springs you'll need new hangers which are going to dictate your height so if you're looking to maintain the same height, you'd want to choose new hangers which are the same height as your…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Frank! This is a newer product, so there aren't many long-term owner reviews available yet. That said, we have done extensive testing on the Benton MoveHitch #B86VR. A strain gauge was used to measure the forces the carrier experiences during…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Bearing Buddy Bra for Bearing Protector on 2008 Shorelander Galvanized Boat Trailer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching