How Deep and Wide is the TorkLift Power Armor Box part # TLA7712R

Question

Question:

What does the bottom of this box width? TorkLift PowerArmor Locking Battery Box - 6V and 12V Batteries - Diamond Plate Aluminum Item # TLA7712R

asked by: Lisbeth

0

Expert Reply:

The TorkLift PowerArmor Locking Battery Box - 6V and 12V Batteries part # TLA7712R is 8 1/4" wide and 23 15/16" long. I have included a photo with dimension lines on it for you to check out.

expert reply by: Randy B

0

Answer 1

To prevent your truck battery from draining from an auxiliary trailer battery like you plan to install when the vehicle is off you'd need to install an isolation solenoid on the 12 volt accessory circuit like with the part #PK5231201. This will…

view full answer...

Answer 2

It will Doug! It's going to be a tight fit but your Epoch Lithium Battery Model 12300AH Battery will indeed fit inside the TorkLift PowerArmor Single Locking Battery Box item #TLA7720R. The issue you're going to run into is the narrow gap at…

view full answer...

Answer 3

Hey Jay, the correct replacement converter to replace what you have now that is compatible with LifePO4 batteries would be the part #PD69RR that you referenced. Progressive Dynamics likes to change their part numbers a lot and create revisions of…

view full answer...

Answer 4

Hey Donald, Nope! The Bluetooth/WiFi app is free to download and free to use with the portable Watchdog Surge Protector #HU42VR. There will be a QR code on the front of the surge protector that you simply scan and it will get you all set up. I have…

view full answer...

Answer 5

The holes on the bottom of the TorkLift PowerArmor Locking Battery Box #TLA7700L aren't necessarily designed for mounting the box and are really there to allow moisture to escape and as access holes for wiring. According to the instructions there…

view full answer...

Answer 6

The Shackle Strap part #TRSL350 comes as a single strap. There should be 2 shackle straps per spring on a single axle trailer. You would need to order 4 of the part #TRSL350 for a single axle.

view full answer...

Answer 7

Hello Nick, thanks for reaching out. When replacing your equalizer, the replacement must be identical in size to the stock equalizer. There is a small amount of wiggle room, like 1/2" or less, but any more than this can throw your suspension out…

view full answer...

Answer 8

The Torklift #TLA7710R battery box is intended to mount to the trailer frame via the included self-tapping screws that you'd shoot through the box and into the trailer A-frame. You could use U-bolts if you wish but it isn't necessary.…

view full answer...