I Draw-Tite Hitch on a 2019 Subaru Outback Wagon a Good Fit for Thule Bike Rack

Question

Question:

I need a trailer hitch for my 2019 Subaru that is compatible with my current bike rack a Thule 99058 Roadway. Im looking at the Draw Tite 76227 but am not sure if the hitch provides enough clearance to allow install of the rack without hitting the bumper. Also, I have a somewhat steep driveway so ground clearance is an issue. What is the ground clearance for the installed hitch? Is this info on your website? Thanks.

asked by: CRAIG M

1

Helpful Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver # 76227 is an excellent option for use with the Thule Camber # TH9058 on your 2019 Subaru Outback Wagon!

When we installed this hitch on a '19 Outback Wagon we found that from the center of the hitch pin hole to the furthest edge of the bumper measured 2". Since the center of hitch pin hole to the mast on the Camber measures 5-3/4" this gives you 3-3/5" of space between the bike rack and your vehicle.

As far as ground clearance goes we found that to be 16" from the ground to the top inside of the receiver so you're really looking at about 13-3/4" above the ground when we take into account the 2" receiver and the collar around it. This is about normal for an Outback Wagon.

Attached is an installation video of this hitch on a '19 Outback Wagon for you to check out.

expert reply by: Jon G

1

click to enlarge

Answer 1

I do have an option for you but the Draw-Tite Max-Frame Trailer Hitch Receiver part #76227 will only fit a Subaru Outback Wagon up to 2018. For your 2019 Subaru Outback Wagon you will want to use the Draw-Tite Max-Frame Trailer Hitch Receiver part…

view full answer...

Answer 2

Trailer hitches are normally relatively simple installs. The Draw Tite hitch part #76227 that you referenced which is a confirmed fit for your 2016 Subaru Outback Wagon is more involved than most but if you have basic mechanical skills and tools it…

view full answer...

Answer 3

If a trailer hitch sticks out past the rear bumper of the vehicle it is installed on it you do run the risk of hitting your shin on it as you walk by. The good news is that the Draw Tite hitch part #76227 sits about flush with the rear bumper so that…

view full answer...

Answer 4

To install the Draw-Tite Max-Frame Trailer Hitch Receiver #76227 on your 2018 Subaru Outback you only need a torque wrench capable of more than 50 ft. lbs, which is going to be most of them. I recommend getting one that has a wider range for other…

view full answer...

Answer 5

For your 2016 Subaru Outback I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #76227. This style of hitch is going to provide the cleanest look because the cross bar sits behind the bumper which also allows for a bit more ground clearance…

view full answer...

Answer 6

It looks like Subaru only offers a class I, 1-1/4" trailer hitch for a 2011 Subaru Outback. Therefore, if you need a class III, 2" trailer hitch for your 2011 Subaru Outback you will have to use an aftermarket trailer hitch. The issue with…

view full answer...

Answer 7

The Curt hitch receiver item #C13410 and the Draw-Tite hitch receiver item #76227 are identical hitches in almost every way. They both have the same capacities and installation methods and are hard to identify once they're installed on a Subaru.…

view full answer...

Answer 8

The ultimate hitch for your 2017 Subaru Outback Wagon for ground clearance and towing capacity is the Stealth Hitch part #391SUOB15T which comes with wiring and everything needed to tow your vehicle including a ball mount. What makes the ground…

view full answer...

Answer 9

There is very little difference in bumper clearances between the Draw-Tite Trailer Hitch Receiver #76227 and Curt Trailer Hitch Receiver #C13410 that fit your 2015 Subaru Outback. You aren't going to hit a knee on either, as the face of the hitch…

view full answer...

Answer 10

You're basically hit the nail on the head with the main differences between the Draw-Tite, part #75673, and the EcoHitch, part #306-X7162. The Draw-Tite is less expensive and is a great hitch, but the EcoHitch has a cleaner more OEM look to it.…

view full answer...

Answer 11

The lightest trailer hitch for a 2015 Subaru Outback Wagon is the Curt Trailer Hitch Receiver part #C13410 at around 27 lbs follow by the Draw-Tite Max-Frame Trailer Hitch Receiver part #76227 at about 30 lbs. I think these are both great options…

view full answer...

Answer 12

I went out to the warehouse to take the measurements you asked for and found that the hitch measured approximately 2-1/2 inches from the center of the hitch pin hole to the end of the receiver. In terms of the receiver depth of the Draw-Tite #76227…

view full answer...

I Draw-Tite Hitch on a 2019 Subaru Outback Wagon a Good Fit for Thule Bike Rack

Featured Help Information

Miscellaneous Media

Continue Researching