To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This Curt trailer hitch receiver adds real utility without overdoing it. With a 1-1/4" x 1-1/4" receiver opening, a 2,000 lb maximum gross trailer weight rating, and 200 lb tongue weight, it’s built for light-duty towing, small trailers, or hitch-mounted accessories like bike racks and cargo carriers. The square-tube design keeps everything sturdy and stable, so you can haul your gear or tow a small camper with confidence.
You don’t need welding equipment or a lift to get this hitch in place. The bolt-on installation uses factory attachment points and comes with all the hardware you need. Many folks install it in their driveway using basic tools and a simple step-by-step process. Once tightened down, the precision robotic welds line up perfectly for a secure fit that’s ready to work.
Built from fully welded steel, this hitch has a gloss black powder coat finish over a protective base coat that resists rust and corrosion. It holds up against road grime and moisture while maintaining a clean look under the bumper. The visible cross tube design blends strength with utility, giving you a solid mount that still looks neat after years of use.
Whether you’re towing a lightweight trailer or carrying bikes to the trailhead, this hitch is ready for common towing setups. The receiver accepts standard Class I ball mounts, bike racks rated for Class I use, or small cargo platforms. Drawbar, pin, and clip are sold separately, so you can pick the right combo for your setup instead of being locked into one option.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Have bought/used your products before though this time I found the added weight of the product alone caused the car to right too heavy. When adding the bike rack and bikes the car felt unbalanced. This car had only 25k miles on it and well cared for so it wasn't the car's suspension. Removed the product. I still trust and respect your company and will likely buy again at sometime.
I've had this hitch on my 2017 WRX for over a year now. The hitch install was relatively easy and quick. It lost a star for noise. I had to do a bit of adjusting and modifications to make the hitch bounce less to reduce noise. It's also rusting a bit, but that might be to blame on the Michigan salty roads during the winter.
Everything from my experience on etrailer website ordering my hitch, to it being sent, arriving on time, the installation video, and towing my motorcycle trailer w my 17' WRX went great! Nothing more to say other than "thanks etrailer!"
Really pleased with my new Curt Hitch. Quality was excellent and installation instructions pretty accurate. I was worried about my mufflers on my WRX rattling against the hitch after reading some reviews...but it fits perfect and nothing rubs. I used it yesterday on a bumpy mountain road with no issues.
This hitch will fit flawlessly on your WRX so long as you follow the excellent included instructions. Extremely happy with the quality, durability, and pricing of the product. I use it every weekend for my bike rack. Also was delivered quickly and protected well in the packaging. Would buy again!
The trailer works really well for the amount of money it cost. It definitely could be easier when it comes to installation.
This is the third hitch I have purchased from etrailer and installed. The hitch and accessories arrived in great shape and look good once installed. The installation was not as easy as I was led to believe via the description and instructions. The instructions and the related video say that the holes on the frame “may need to be enlarged”. This is an understatement! The holes on the 2014 impreza are about ½ inch and need to be 1 inch! Save yourself some time and get a 1 inch step drill bit for $30-$40. I also removed the muffler completely before the install which ended up being a good decision. It came off pretty easy and without the muffler in the way it was very easy to remove the heat shield in order to drill the hole for the bolt. For the hole in the heat shield I used a 1 ½ hole saw for a nice clean hole. Total time to install was about 2.5 hours.
The installation was about as expected from the instructions. Dropping the exhaust was very easy once I used a good deal of WD40. Also, it was very easy to support the muffler with a floor jack and a tie-down strap as back-up. I used a 1" hole saw and tin snips to trim the heat shield; this was fairly stress free. To enlarge the access holes for the hardware I just drilled small holes in 2 places for each side and cleaned it up with a file. The fish-wire procedure was amazingly easy and worked just as noted in the instructions - the first try with each of the 4 sets of hardware.
I'm very happy with the final installation. The hitch fits perfectly up underneath the rear fascia and generally looks good. I have had other good experiences with eTrailer hitches in the past.
The installation was about as expected from the instructions. Dropping the exhaust was very easy once I used a good deal of WD40. Also, it was very easy to support the muffler with a floor jack and a tie-down strap as back-up. I used a 1" hole saw and tin snips to trim the heat shield; this was fairly stress free. To enlarge the access holes for the hardware I just drilled small holes in 2 places for each side and cleaned it up with a file. The fish-wire procedure was amazingly easy and worked just as noted in the instructions - the first try with each of the 4 sets of hardware.
I'm very happy with the final installation. The hitch fits perfectly up underneath the rear fascia and generally looks good. I have had other good experiences with eTrailer hitches in the past.
Overall the design intention is there. It's well made as far as assembly goes. It's very poorly designed in terms of clearance with other parts, namely the dual exhaust setup on the WRX. I don't understand how people could mention rattling and still give this unit 4 or 5 stars? It is unbelievably annoying. I have adjusted my mufflers and the hitch itself a number of times now yet it still rattles like crazy. I even purchased aftermarket exhaust hangers for the mufflers hoping they would tighten up how they hang and keep them away from the hitch but it doesn't matter, it still rattles like crazy. It's pretty embarrassing riding around in this pristine $30k car and having a distinct rattling noise come from the rear of the vehicle EVERY time you start, downshift or get to about 3k rpms while decelerating. I would DEFINITELY NOT buy this product again if I was in the market. I guess you get what you pay for, should have gone with the eco hitch but then again I think that's too expensive for what it is.
As a side note. I don't recommend cutting into the frame rail like the directions tell you to just to install the included hardware. You risk the chance of corrosion or moisture and salt getting in the frame rail because you'll never seal it right after you cut it/enlarge the opening. If you remove the bumper (Which takes less than 5 minutes) and then the bumper support bar (8 bolts) you can just install the hardware (Metal plates and bolts) in the end of the frame rail, no cutting at all.
Really easy to install if you have the right tools! Hardest part was just grinding out the back holes for the bolts to fit, other than that it's a simple bolt on.
I opted for this hitch over the more expensive eco hitch. Well, that was a mistake. It has a terrible fit. Probably got under the car 5 or 6 times to try shaving the hitch down for more clearance, but in the end there was always an issue with something rattling or banging. Save yourself the time and money and just get the ecohitch, or you'll wish you did.
Jenny N.
10/13/2022
You mentioned that you are experiencing rattling or banging underneath the vehicle. Is it that that the hitch is rattling against the exhaust? If that is the case, we do have a FAQ that helps. Please see the FAQ link below:
Helpful Links
I’ve had this for over a year installed on my 21 STI. Works great holding my bike rack or cargo tray. Did have some rattling after install but that was solved by adding some rubber tubing around my exhaust hanger.
It rattles. I followed the instructions to a "t" and watched the install vid about 5 times. The install vid was great. It took me and my wife and I about three hours to get it installed ourselves. We made sure to tighten everything down, torque the flange nuts to specs, etc. But it rattles. They should not advertise this hitch as being compatible with the WRX, as it's clearly not. Not sure what my next steps will be.
Jenny N.
7/13/2022
You mentioned in your review that it is rattling and I wanted to let you know that this can be a common occurrence. It is most likely rattling because the hitch is rattling against the exhaust and there is a fix for that. Please see the FAQ below. It gives information on how to prevent the rattling.
Helpful Links
This is not as easy to install with the stock WRX exhaust, FYI. In the etrailer.com video the install is done on a car with an aftermarket muffler delete which leaves a ton of room to work.
Also, once installed, the hitch itself hits the exhaust hangers on the stock exhaust and causes quite a rattle. I will have to drop the exhaust again and do a slight modification to the hitch to clearance for the exhaust hanger closest to the rear bumper... I did everything I could to try to move the exhaust on the hangers and the hitch on its mounting hardware and there was no way to get it to not touch.
Not awesome, but still not a terrible install and definitely one of the cheaper options for the car, so I guess you get what you pay for.
Victoria B.
9/3/2019
It sounds like you may have already tried these things, but I have attached a help article on correcting hitch rattle for you. I cannot recommend modifying the trailer hitch because that will void the hitch warranty and may compromise the structural integrity of the hitch. Another hitch option for your WRX, the EcoHitch # 306-X7257, installs higher on the vehicle and is designed to hug the spare tire compartment, sitting further away from the exhaust system. Ive attached an installation video of the EcoHitch being installed on a WRX with a full exhaust system for reference.
This trailer mount is well built and very solid. It is a little difficult to put on without a lift but I put the rear of my car up on jack stands and dropped the exhaust down. It was difficult to put the mount bolts through the holes and had to cut notches in the frame to accommodate getting them fed into the mount holes. Took about 1 1/2 hours to install.
Brian W.
6/16/2015
HI, I was wondering how low the hitchreceiver was to the ground after installation? The WRX sits so low as it is I am concerned about ground clearance?ThanksBrian
Heath F.
2/26/2016
Still looks great and holding strong. Ground clearance isnt an issue.
Little tougher then expected. Modifications were needed to thread the screw/plate though, but the right tools made it easy. Looks amazing and looking forward to using the product.
Bryan Q.
7/21/2017
No complaints
Great product! Fits very well and looks even better. Took only a couple hours but it's a very simple install with the right tools. Use a lift if possible to simplify the install even more.
Tim
8/8/2019
I had to remove the hitch from my car because it was too close to the exhaust and made too much noise from vibration when driving.
Rachael H.
8/21/2019
Great product. Fitment is spot on. I did this installation alone with no problems. Didn’t even remove my aftermarket exhaust. Took about an hour and a half; including lugging up all the tools necessary. And it supports all 250 lbs of me bouncing on it, with no creaks or stress.
The build quality of this hitch is great I liked the weight it had and really like the line they give you to fish the bolts through the frame. It did not take long to install the steps were very easy to follow as well. The only problem I had was the coating on it. I work for a powder coat shop and when I prepped it for coating there were some sections that the coating came of easily. But other than that I love this thing and can't wait to make stuff to use with this.
Just installed my hitch on a 2016 Subaru WRX and couldn't ask for an easier installation. Great product and superb fitment. Also reall like the fact of the instructions are really easy to read and even had pictures.
Great product and fast shipping!!!!
Thanks
Second Curt hitch for me. Nice, detailed instructions with photos. All the components included. It's real close to the muffler and makes it rattle a little. Going to try to adjust that tomorrow.
Laura E.
2/1/2017
Thanks for your business and your review, Gen. For help with muffler rattle, try these helpful tips:
Helpful Links
Its a great hitch, especially for the money. The quality is spot on.
It has been rattling against my muffler, and I took it into a shop that said it is a clearance issue. I don't know if anyone else has been experiencing the same issue, but its highly annoying. Great hitch otherwise.
Laura E.
3/18/2017
Charles, good news! There is a remedy for this issue. Check out our help article located at the following link:
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Alec
1/14/2019
Overall I like the trailer hitch. The paint has been chipping away which is causing the metal underneath to rust. I believe a better type of paint, or changing the process in which the paint is applied would help.