See what our Experts say about this etrailer Trailer Jack

• Recommended Jack for a 5 x 10 Utility Trailer
  Hey Gill. It sounds like you need a jack for your utility trailer. If you have an a-frame trailer tongue with a hole drilled into the center you can use the Round A-Frame Trailer Jack item # TJA-2002-B with the foot plate # JF-101BK or item # JC-101 if you prefer a wheel. This is a top wind jack with a 2,000 lbs capacity, 1,200 lbs with the wheel. It has a 9-1/4" retracted height and can extend up to 24". If you don't have an a-frame trailer, I recommend the Fulton Boat Trailer Jack w/...
  view full answer...
• Replacement Trailer Jack With Caster for Zeiman Jet Ski Trailer
  The wheel you described was for an Atwood jack and the replacement is no longer available. With this odd size jack, we don't have any compatible replacement, so I recommend replacing your jack. If you have an A-frame trailer then I recommend the Round A-Frame Trailer Jack - Topwind - 14-3/4" Travel - 2,000 lbs # TJA-2002-B with wheel # JC-102. If you have a swivel jack, then I recommend the Fulton Bolt-Thru Swivel Trailer Jack # FXPD15L. This dual wheel jack will work well for you.
  view full answer...
• Replacement Jack Options For a 2012 Casita Spirit Deluxe
  Based on images I can find for your 2012 Casita Spirt Deluxe it appears it came with a standard top wind jack like the # TJA-2002-B. Unfortunately, there is not a database like you have with cars to lookup parts since RV manufacturers do not keep these records and will constantly change parts depending on what is available. This may or may not match exactly what you currently have on your camper as it is 12 years old and could have been changed since it was new. As these are a mostly universal...
  view full answer...
• Replacement Trailer Jack for Sundowner Horse Trailer
  Yes it is called a trailer jack so you were right. For a replacement you could use the # TJA-2002-B with the foot plate # JF-101BK to replace what was damaged and you'd be set.
  view full answer...
  
• Could Round A-Frame Trailer Jack # TJA-2002-B Replace 1,000 lb Trailer Jack
  The great thing about A-frame trailer jacks is that the bolt pattern used is a standard bolt pattern that basically all trailer jacks are designed to fit. So the 2k rated trailer jack # TJA-2002-B will bolt up but you still might want to verify that the diameter of this jack matches your trailer as occasionally sometimes the hole on the trailer is a bit too small. This jack needs a 2-1/4 inch hole on the trailer to fit through. I attached an install video for this jack for you to check...
  view full answer...
• Replacement Jack for 1997 Starcraft Meteor 814 Classic
  We don't offer a replacement jack that would be compatible with the bracketry you show in your photo, but we do offer an option that would work for you. Folks use side-mount jacks on A-frame trailers all the time, but as you found they're not very stable because of the tilting force placed on them because the load is off-center. I'd recommend replacing your existing coupler with part # CA-5100-Z which would provide a strong and secure mounting location for the jack. The coupler is a weld-on...
  view full answer...
  
• Recommended A-Frame Jack And A-Frame Coupler For Custom Boat Trailer
  We don't have any A-frame jacks with the outer tube measurement of 1-3/4 inches. All of our standard jacks have a minimum of a 2 inch inner tube and 2-1/4 inch outer tube diameter like you find on the Round A-Frame Trailer Jack - Topwind - 14-3/4" Travel - 2,000 lbs, # TJA-2002-B. These jacks come in a wide variety of capacities and with different foot or wheel options. My recommendation because you do have the mounting flange measurements is to get the proper jack for your capacity...
  view full answer...
• Foot Replacement for Ram A-Frame Jack with 2,000 lb Capacity
  Thanks for the picture of your jack. From that I can tell that you have the Round A-Frame Trailer Jack # TJA-2002-B and the correct replacement foot you'll need is the # JF-1005H-Z that you mentioned. This will give you up to an additional 8 inches of additional height in 2 inch increments.
  view full answer...

Do you have a question about this Trailer Jack?