Will Curt Bumper Mount Trailer Hitch # E-3S Fit a 2007 Toyota Tacoma Bumper

Updated 07/30/2012 | Published 07/26/2012

Products Featured in This Question

Curt 2" Trailer Hitch - Bumper Mount - 8-3/4" Bolt Pattern - 5,000 lbs GTW

(41)

$90.94

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(368)

$171.83

Question:

Will it fit 2007 Tacoma bumper? Bumper has 3 ball mount holes.

asked by: Ren

Expert Reply:

The Curt Bumper Hitch, part # E-3S, is made to attach to a truck step bumper. It is a universal fit design so it is not listed for a specific vehicle. The mounting holes are 8-1/2 inches center to center between the holes.

If your 2007 Toyota Tacoma has a step bumper and has mounting holes with the 8-1/2 inch dimension then it will bolt to your bumper. If you do not have holes that will line up with the hitch then you can still use the hitch but you would have to drill new holes. I am including a picture that will show the measurements for the Curt hitch.

The weight capacity of the Curt hitch is 5,000 lbs. gross towing weight and 500 lbs. tongue weight. But the actual towing capacity of the hitch will be the lowest rated item in the system which is either the vehicle capacity, the bumper capacity or the hitch itself, whichever is lowest.

I also have a frame mounted hitch like the Draw-Tite Class III Trailer Hitch, part # 75236, which will fit your 2007 Toyota Tacoma. It has a weight capacity of 5,000 lbs. and a tongue weight capacity of 500 lbs.

I am sending a link to the instructions on the Curt bumper hitch and a video link of the Draw-Tite being installed on a 2007 Tacoma.

expert reply by: Jeff D