Replacement Wiring Harness Bracket for 2004 Chevy Silverado 2500HD with New Curt Hitch

Question

Question:

Hello, I have a 2004 silverado 2500 HD and was recommended this hitch. I would also need to replace the bracket/connector vehicle wiring harness as the OEM one is welded to the original hitch. Which wiring harness do I need to purchase with #14211? Thank you

asked by: Ben N

0

Expert Reply:

In order to mount your OEM wiring connectors to the Curt Trailer Hitch Receiver # 14211 on your 2004 Chevy Silverado 2500HD we have the No-Drill Bracket # C57202. This wraps around the crosstube of the trailer hitch and allows you to mount a connector that has a bracket like part # HM48625.

If you're also needing a new connector then I recommend using the Hopkins Endurance # HM40975 because it looks great and is actually the OEM replacement for a lot of different pickups.

expert reply by: Jon G

0

Answer 1

The difference between the Curt #14211 and the Curt #C14008 is pretty subtle, but it has to do with how they mount to the frame of the vehicle. The Curt #14211 mounts in factory drilled holes further forward in the frame allowing it to fit on a 2003…

view full answer...

Answer 2

For a 2002 GMC Sierra 2500 HD, you'd want to use the Curt Class V hitch, part #C15703. I checked with Curt, and found that the drop of this hitch (measurement from the mounting flange to the top of the crossbar) is 5.13 inches, as shown in the…

view full answer...

Answer 3

Hey Phil, If you're looking for the factory wire harness for a plug and play connection you'll find a connector that's gray with a red/orange center like the plug on the Curt Custom Wiring Adapter for Trailer Brake Controllers #C51436.…

view full answer...

Answer 4

The Curt #C15323 is indeed a fit for your 2001 Chevy Silverado 2500 truck, as confirmed by Curt. The hitch has a 16000 lb towing/2400 lb tongue weight capacity, and would install as shown in the linked video.

view full answer...

Answer 5

The B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25182 will fit your 2006 GMC Sierra 2500HD if you have a 6-1/2' short bed. If you have an 8' long bed you will need their Receiver #BWHDRH25189

view full answer...

Answer 6

There are heavy-duty Class V trailer hitch receivers that fit your 2004 GMC Sierra 2500 LD, though the hitch you mentioned is only a fit for the 2500HD model. You need to have the standard factory bumper on your truck, and if you do, then there are…

view full answer...

Answer 7

Hello Nick, I have an option for a new bracket and 7 way for the back of your 2006 Chevy Silverado 2500, but we do not have a mounting bracket for the Hopkins Endurance Twist Mount 7-Way RV Trailer Connector - GMC and Chevy - Vehicle End #HM40920 as…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Replacement Wiring Harness Bracket for 2004 Chevy Silverado 2500HD with New Curt Hitch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching