Is There an Installation Video of the Tekonsha 119250KIT on a 2014 Audi Q7

Updated 04/22/2020 | Published 04/21/2020

Products Featured in This Question

ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit

(522)

$192.62

Firestone Fuse Circuit Tap Kit

(39)

$20.98

Question:

Does the Tekonsha wiring kit for a 2014 Audi Q7 without factory factory wiring have an installation video? Do you have to connect the harness to the battery? Does the wire run from the underside of the vehicle and connect to the hitch until needed or does it run from the inside of the SUV? The picture that you have on your site shows a 2017 Audi Q7 running the wire from the inside of the SUV and out between the tailgate. Thanks for the help!

asked by: Stuart H

Expert Reply:

It sounds like you're referring to the Tekonsha # 119250KIT for your 2014 Audi Q7 and there is an installation video on a 2018 Audi Q7 of this linked to this answer. You can bypass connecting the 12v power supply instead to a fuse panel located in the rear cargo area of the vehicle using part # F2526, since this will eliminate the need to run a wire all the way up to the battery under the driver's seat. The photo you're referring to is actually the 4-way connector you're installing, and it will only hang out of the rear tailgate when you need it for towing; otherwise, it should be stored inside the vehicle.

Check out that video on the installation of the Tekonsha # 119250KIT and let me know if you have any other questions on this.

expert reply by: Erik B