Grease Cap Plugs RG04-010 fir Dexter E-Z Lube Grease Caps

Question

Question:

do the fit Dexter e-z lube?

asked by: tim w

0

Expert Reply:

Yes,the RG04-010 Grease cap plugs fit the Dexter E-Z Lube grease caps on the Dexter E-Z Lube axles.

expert reply by: Robert G

0

Answer 1

An ST205/75R15 trailer tire, such as the Kenda Karrier #AM10244, will have a maximum load of 1,820 pounds at 50 psi. When used on your tandem axle trailer, this will provide you with a combined load capacity of 7,280 pounds (4 X 1,820). In terms of…

view full answer...

Answer 2

I've linked our selection of 205/75 R15 tires for you. They're all made in Asia. It's pretty hard to find tires made in US anymore. Of the selection I recommend the Westlake #LHWL300. It's a load range D tire with a max load of 2,150…

view full answer...

Answer 3

The closest modern tire size to a 7.00-15 tire is a 225-75-15 like the #AM10256 tire you mentioned. Typically, a 225/75-15 tire will measure about 8-3/4 to 9 inches wide by around 28-1/2 inches in diameter. We offer the same size in a Load Range E as…

view full answer...

Answer 4

Yes, the Dexter E-Z Lube Axles still require cleaning and repacking of the bearings every 12 months or 12,000 miles. The zerk fittings on the end of the spindle are to add new grease in between maintenance intervals but they are not designed to…

view full answer...

Answer 5

Grease Seal #RG06-050 is the replacement part for the Dexter 010-019-00. It is 1.719 inches inner diameter and 2.565 inches outer diameter. It is a fit for 3500 lb axles. This is a confirmed replacement cross-reference.

view full answer...

Answer 6

The Replacement EZ Lube Drive-In Grease Cap #21-41-1 that you referenced has an overall height of 1-3/8". From the top of the grease cap to the bottom edge of the lip that stops it on your hub is measures 1" tall. If you don't already…

view full answer...

Answer 7

The 1.18" width on the Grease Cap Plug for E-Z Lube Grease Caps #RG04-010 is the only size that is offered.

view full answer...

Answer 8

The Dexter 8-248 is a 3500 lb idler hub which uses the L44649 outer/L68149 inner bearing and a 10-19 grease seal. The bearings cross reference to the A4 and A17 bearings you mentioned and the 10-19 seal cross references to the 171255 seal. For…

view full answer...

Answer 9

The Grease Cap Plug for the E-Z Lube Grease Caps, #RG04-010, has a measurement of 1.18 inches. I checked a few other references and could not find any measurement other than the 1.18 inches for the size of the rubber plugs.

view full answer...

Answer 10

If you can get me the axle capacity or even just the diameter of it I would be able to tell you what seal and u-bolts you'd need.

view full answer...

Answer 11

EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…

view full answer...

Answer 12

The Dexter "8-248" is a hub assembly for 3,500 lb axles that uses an L68149 inner bearing and a L44649 outer bearing. This hub assembly was offered in both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns therefore you would need to…

view full answer...

Grease Cap Plugs RG04-010 fir Dexter E-Z Lube Grease Caps

Product Page this Question was Asked From

Continue Researching