Are Different Sizes For The E-Z Lube Grease Cap Plug Available?

Question

Question:

Is there only size for the ez cap plugs?

asked by: Patrick G

0

Expert Reply:

The 1.18" width on the Grease Cap Plug for E-Z Lube Grease Caps # RG04-010 is the only size that is offered.

expert reply by: Bryce D

0

E-Z Lube Grease Cap Width
(click to enlarge)

Answer 1

Hey Pete, yes all of the bolts that come with the Dexter Heavy Duty Suspension Hanger Kit part #K71-449-00 are wet bolts and have zerk fittings. The shackles are wider at 1/2 inch which the bolts that come with this kit are long enough to…

view full answer...

Answer 2

Hey Allen, your equalizer is a pretty standard option but your shackles being that long is not something we see. Did someone install longer shackles as a lift kit?

view full answer...

Answer 3

Hey Guy, While I can't answer that directly as I don't know what axles you have, I can tell you how to figure out if the right kit for you is the DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle Trailers #DE66AR. What it comes down to is…

view full answer...

Answer 4

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. Since the figure you came up with doesn't match any of…

view full answer...

Answer 5

Hey Darrel, since you like the DeeMax 7k slip on kit the part number you'd need is the #DE46AR which comes with the slip on rotors and the needed actuator and lines. So for an idler hub what you'd want is the part #8-231-50UC1 and you'd…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hello Larry, thanks for reaching out. We do have the Roadmaster Comfort Ride system for your 2021 solitude 310gk-r with tandem 7K axles and CRE3000 suspension. For that, you will want the following: - Roadmaster Comfort Ride Leaf Spring Suspension…

view full answer...

Answer 8

Generally you'll want to replace your equalizer and shackles with ones that have the same or similar dimensions. The equalizer in the #AP233 kit has a 2" tall and 5-3/4" long (eye bolt center to eye bolt center) and the shackles…

view full answer...

Answer 9

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Answer 10

It sounds like the Replacement Shackle Link with Bolts #018-026-05 that you referenced is what you are needing. It comes with the shackle and wet bolts that have a grease zerk fitting installed on them. This kit is compatible with the following heavy…

view full answer...

Answer 11

Hello Nick. The red bearing grease is generally a lithium-based grease. When filling your bearing buddies you do need to use the same lithium-based grease such as the Dexter Multi-Purpose Lithium Grease #DX64TR. You cannot mix dissimilar greases. The…

view full answer...

Answer 12

Hello Lance, thanks for reaching out. When replacing shackle straps and equalizers, the replacement parts must be identical in size to the original. Since your current shackles are 3.5" long, you will NOT be able to use the 2-1/4" shackles…

view full answer...

Are Different Sizes For The E-Z Lube Grease Cap Plug Available?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching