Recommended Side Door Step for 2018 Ram ProMaster 2500

Question

Question:

Can you provide the width of the mounting bracket. Im looking for 1 step to mount on the sliding door side of my 2018 ram promaster 2500 cargo van. I need a step that is 7inch from hole to hole to mount it.

asked by: Beth V

0

Expert Reply:

At around the 1:40 mark on the attached installation video for # BBS-1103, you can see that the Bully Black Bull Side Steps mount on a little over 8 inches on center. These are designed to fit a wide range of vehicles, but your 2018 Ram ProMaster 2500 isn't one of them.

We do have one custom fit solution to add a step below the sliding door on the side of your ProMaster with the Carr Hide Away Step for Work Trucks # CARR501090. The really nice thing about this step is that it's designed to store under your van when not in use. Just push the step with your foot to extend or retract it. The step bolts to the flat bottom surface of your PoMaster's tool box and can handle up to 500 lbs.

All of the other hoop style steps compatible with your 2018 ProMaster, like # CARR105774 and # CARR105771 are designed to install beneath the passenger and driver front doors only.

expert reply by: Carla M

0

click to enlarge

Answer 1

I have attached some screenshots below from the instructions for the Carr Hide Away Step for Work Trucks item #CARR501090. It looks like there is a lot of latitude in how you mount these slide out steps on your 2022 Promaster 2500. The instructions…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

Thanks for reaching out, Jack! What I recommend using is the Curt Adapter #C57672 and securing it to your vehicle with the No-Drill Bracket #18136. This gives you the ability to seamlessly use either the 4-Way or 7-Way connection but doesn't…

view full answer...

Answer 8

Hey Joseph, It really is going to depend on how much tongue weight your trailer has. Have you had the tongue actually measured while it's fully loaded? If it was already installed did you already travel a bit with it? Was the ride super stiff or…

view full answer...

Recommended Side Door Step for 2018 Ram ProMaster 2500

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching