Recommended Trailer Hitch and Wiring For a 2019 Volvo XC90

Question

Question:

which hitch for a 2019 Volvo XC90? wiring?

asked by: Marky M

0

Expert Reply:

I recommend the Curt Trailer Hitch Receiver - Custom Fit part # C53HR for the 2019 Volvo XC90 because of it's concealed cross tube design for a nice clean looking install. The only portion of the hitch that is visible once installed is the square receiver tube. I have attached installation instructions for your reference.

For the wiring, I recommend Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118683. The Tekonsha brand wiring has proven to be more reliable and durable than the other brands especially the converters. This wiring harness will give you a 4-Pole flat on the Volvo to illuminate trailer lights. I have attached an installation video for your reference.

expert reply by: Heather A

0

Answer 1

Hey Julie, I did some checking and it looks like your 2025 Volvo XC90 is not pre-wired for a brake controller so you'd have to hardwire in a proportional controller like the P3 part #90195. So I know you said you have the tow package, what…

view full answer...

Answer 2

We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…

view full answer...

Answer 3

Hey Ryan, welcome back! A brake controller will cover anything with brakes and then you will also need a ball mount. The #C57DR you were looking at will work, but you don't really need all of that. The sway bar would be a permanent addition to a…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 10

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 11

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 12

Not another one! Just kidding Dirk! I was in the Marines I enjoy these conversion questions on the M1101 trailers. I'd be more than happy to list the parts you need, along with quantity, and confirm compatibility. 1 - Timbren Axle-Less Trailer…

view full answer...

Recommended Trailer Hitch and Wiring For a 2019 Volvo XC90

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching