Parts Needed To Flat Tow A 2020 Chevrolet Spark
Updated 02/12/2020 | Published 11/15/2019 >
Products Featured in This Question
Question:
What parts will I need to flat tow my 2020 Chevrolet Spark behind my RV?
asked by: Geoff V
Expert Reply:
One thing unsure from your question is the transmission type. The 2020 Chevrolet Park should not to be flat towed with automatic transmission models. Per the note below from the owners manual: "Vehicles with an automatic transmission should not be towed with all four wheels on the ground. If the vehicle must be towed, a dolly should be used. See "Dolly Towing" following."
If yours is a manual transmission, below are the parts you will need to flat tow your 2020 Chevrolet Spark LT with manual transmission include the following parts.
Tow Bar - Roadmaster Falcon All Terrain # RM-522
Base plate kit - Roadmaster Direct # RM-523202-5
Safety cable set - # RM-643
Tow Bar Wiring - Roadmaster Tail Light Wiring Kit # RM-155
Supplemental braking system - SMI Stay-IN-Play DUO # SM99251
Included are video resources with additional information and a Help Article as well to help you get started.
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: rv ladders accessories and parts
- Search Results: accessories and parts
- Search Results: ladder
- Search Results: rm522
- Video: Review of the Replacement Standoff for Stromberg Carlson Exterior RV Ladders
- Q&A: Flat Towing Setup Recommendations for a 1998 Honda CR-V
- Shop: Surco RV Exterior Ladder - Aluminum - 97" Tall - 250 lbs
- Shop: Replacement Standoff for Stromberg Carlson Exterior RV Ladders - Qty 1
- Shop: Surco RV Exterior Ladder - Aluminum - 84-1/2" Tall - 250 lbs
- Shop: Replacement Standoff for Stromberg Carlson Exterior RV Ladders - Qty 1
- Shop: Stromberg Carlson RV Exterior Ladder - Aluminum - 99-1/2" Tall - 250 lbs
- Shop: Replacement Bottom Ladder Section for Surco Exterior RV Ladders - Qty 1
- Shop: Replacement Stand Off Assembly for Stromberg Carlson Universal Exterior RV Ladder - Black
- Shop: Vehicle Tow Bar Wiring
- Shop: Base Plate for Tow Bar
- Shop: Vehicle Tow Bar Brake System
- Shop: Trailer Hitch
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer tires and wheels
- Video: Comparing Portable Flat Tow Braking Systems - Curt RVi and Blue Ox Patriot
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar




Leon W.
2/10/2020
My 2020 Chevy Spark owners manual says to disconnect the negative battery terminal. I noticed that there was nothing in the flat tow parts list addressing the negative battery terminal. I dont want to disconnect the terminal every time I hook up my tow bar. Wondering if the Roadmaster battery disconnect switch would be an option. Any suggestions?