Does 2020 Ford F-350 with Leveling Kit Need Spacers When Installing Timbren Suspension Kit

Question

Question:

I have a 2020 Ford F-350 that I plan to put a leveling kit on but also want to install a Timbren setup on the rear for more support. DO I need spacers or anything?

asked by: Shawn

0

Expert Reply:

Typically a leveling kit for the suspension of a truck like your 2020 Ford F-350 is a slight lift to the front suspension so that the front and rear of the truck is leveled. Higher rated trucks like yours have the rear suspension sitting up quite a bit taller since the suspension is beefed up more back there to compensate for the weight of cargo or a trailer.

So with a Timbren kit like the # TFR350SDJ that fits your truck installed you wouldn't need any spacers as long as only the front suspension was lifted.

However, if the the leveling kit does lift the rear of the truck then you will want to install increments of the part # A25723-90AH00 (1 inch) and part # TA25722-90P00 (1/2 inch) until there is 1/2 inch to 1 inch of space between the bottom of the Timbren spring to the top of the contact point or axle.

expert reply by: Jameson C

0

Answer 1

Yes, the Timbren Suspension Enhancement System #TFR350SDJ can be used with the SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA46 on your 2022 Ford F-350. The SuperSprings will mount to your leaf springs while the Timbren replaces…

view full answer...

Answer 2

Yes, the Timbren kit part #TFR350SDJ that you referenced is correct for your 2022 Ford F-350 dually.

view full answer...

Answer 3

Yes, it does. The Spacer Kit for Timbren Suspension item #T68MR will work with the Severe Service Timbren Suspension Enhancement System item #TFRTT350J. This system is confirmed to fit the 2023 Ford F-250. It already includes a pair of 1"…

view full answer...

Answer 4

The height of the Aeon hollow rubber springs on the Timbren Suspension Enhancement System - Rear Axle #TFR250SDJ is 4-1/2". The overall height for the Timbren system is 6-7/8". See the helpful diagram below which shows both measurements. I…

view full answer...

Answer 5

There are two Timbren kits that fit your 2020 Ford F-250 we have the #TFR250SDJ which has an 8,600 pound capacity and fits 2- and 4-wheel drive models. And second we have #TFRTT350J which is rated for 8,000 pounds and also fits 2- and 4-wheel drive…

view full answer...

Answer 6

The only difference between the Timbren Suspension Enhancement System part #TFR250SDJ which is for a Ford F-250 and the Timbren Suspension Enhancement System part #TFR350SDJ which is for a Ford F-350 is that the latter comes with a 1/2" spacer,…

view full answer...

Answer 7

To give your 2022 Ford F-250 Super Duty some additional support, both of the Sumo Springs and Timbrens would be great options. The Sumo Springs Solo Custom Helper Springs - Rear Axle #SSR-127-54 are made of a durable, high-density microcellular…

view full answer...

Answer 8

In regards to the Timbren Suspension Enhancement System part #TFR250SDJ which is a fit for a 2019 Ford F-250, these will fit lifted applications but you'll need to add spacers to make up the difference. The Timbren Spacer part #TA25722-90P00 for…

view full answer...

Answer 9

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Answer 10

Yes, you can stack the 1 inch spacer, #A25723-90AH00 and the 1/2 inch spacer, #TA25723-90AD00 but you will most likely need to replace the hardware too. I suggest you source this locally, purchase Grade 8 hardware, and simply buy one 1-1/2"…

view full answer...

Answer 11

For your 2024 F350 with weight in the back, I would install the Timbren #TFRTT350J which are made for severe duty trucks. This will stop the back from squatting and also save your suspension from wearing quickly.

view full answer...

Answer 12

Here is a list of the bump stop replacements we have which fit your 2024 Ford F-350. If you can tell me how you plan to use your F-350 I can give you my personal recommendation for the option which works best for you. Timbren Front 2WD #TFF350SD2 4WD…

view full answer...

Does 2020 Ford F-350 with Leveling Kit Need Spacers When Installing Timbren Suspension Kit

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching