How To Measure For A SolidStep On 2019 Heartland Pioneer RE275

Question

Question:

will solid step work on 2019 heartland pioneer re275 ?

asked by: CHUCK E

1

Helpful Expert Reply:

I am happy to recommend a SolidStep option for the 2019 heartland pioneer re275. However, I would need a couple of measurements from you first to get you the correct step. First measure the door way width frame to frame like in the photo I have attached. Then you need to measure from the bottom of the doorway to the ground for entry height. If you provide those measurements I can assist you further.

expert reply by: Heather A

1

click to enlarge

Answer 1

Yes, it does! You'll want the 8' long Mighty Cord 7-Way RV Style Trailer Connector w/ Molded Cable item #A10-7W8. To keep all of your connections in a secure organized place, I recommend the Trailer Wiring Junction Box item #3375601100.

view full answer...

Answer 2

In regards to the Lippert SolidStep RV Steps like part #LC791572, you can still shut the door with the steps deployed. The threshold plate is very thin so the door would still be able to close atop this. I have attached for you below a photo which…

view full answer...

Answer 3

When the Lippert #LC791572 steps are properly installed with the threshold plate firmly against the outside threshold you should have no issues. The only thing we hear from customers is how much they love them! While you have your tools out you might…

view full answer...

Answer 4

What do you mean by exchange the door? Do you mean use a different door than what the camper came with? As long as the doorway is 26 inches wide and the threshold is between 27 and 36 inches from the ground the #LC791572 that you referenced will fit…

view full answer...

Answer 5

If there is pressure on the hinge side of the door and screen door from the steps it sounds like the mounting plate wasn't installed far enough back from the door. All the weight of the stairs should be on the floor with just slight securing for…

view full answer...

Answer 6

The SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames - Triple - Aluminum part #LC791572 adds very little to the threshold thickness maybe 1/4" at most. Screen doors will have a little bit of give at the bottom by way…

view full answer...

Answer 7

The SolidStep Manual Fold-Down Steps part #LC791572 on a Palomino Solaire BHS 240 do not appear to be replaceable due to the lack of the standard step mounting bracket underneath the trailer therefore the best option we have for you is with the…

view full answer...

Answer 8

According to the manufacturer the SolidStep Manual Fold-Down Steps for 25" to 28-7/8" RV Door Frames - Triple - Aluminum Item #LC791572 will require atleast 4' of clearance when deployed.

view full answer...

Answer 9

Hello Nancy, I’m sorry to hear you're having such a hard time with the pin system. Unfortunately, you're not alone as I have heard similar complaints from others as well. Sadly, I haven’t found a good way to make the current setup easier to…

view full answer...

Answer 10

I attached a picture that shows how the SolidStep Manual Fold-Down Steps #LC791572 would fit over a taller threshold like you mentioned. I also attached a review video for this for you to check out too.

view full answer...

Answer 11

Hi John; there will be enough room for the Lippert SolidStep RV Steps #LC791572 and a Screen Defender like #LC52FR when closed so you can have them installed at the same time.

view full answer...

Answer 12

You should try to locate the center point of your door frame when installing the SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames - Triple #LC791572. If you take a look at the cut out of the directions I added it does…

view full answer...

How To Measure For A SolidStep On 2019 Heartland Pioneer RE275

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching