Lippert SolidStep Triple Step Recommendation for Winnebago 2401RG with 24 Inch Door

Question

Question:

I am looking at step with model number at LC678041. Does this fit into a WInnebago 2401RG? The inside of my door is at 24.25inch with overall door width at 25.5. Also, does this have a lift assist option?

asked by: David K

0

Expert Reply:

For a Lippert SolidStep Triple step the part number you'll want is the # LC698799 as it has a doorway width range of 24 to 26 inches which will work great with your doorway that measures 24-1/4 inch. We do not have the lift assist versions of these steps though. The # LC733937 lift assist is for 26 inch to 29 inch door frames.

expert reply by: Jameson C

0

Answer 1

Yes, it does! You'll want the 8' long Mighty Cord 7-Way RV Style Trailer Connector w/ Molded Cable item #A10-7W8. To keep all of your connections in a secure organized place, I recommend the Trailer Wiring Junction Box item #3375601100.

view full answer...

Answer 2

Hello Rodney, thanks for reaching out. You did not necessarily do anything wrong when installing your step. It is not entirely uncommon for the Lippert SolidStep RV Steps like part #LC791572 to cause interference with the screen door. The recommended…

view full answer...

Answer 3

I attached a picture that shows how the SolidStep Manual Fold-Down Steps #LC791572 would fit over a taller threshold like you mentioned. I also attached a review video for this for you to check out too.

view full answer...

Answer 4

In regards to the Lippert SolidStep RV Steps like part #LC791572, you can still shut the door with the steps deployed. The threshold plate is very thin so the door would still be able to close atop this. I have attached for you below a photo which…

view full answer...

Answer 5

Hi John; there will be enough room for the Lippert SolidStep RV Steps #LC791572 and a Screen Defender like #LC52FR when closed so you can have them installed at the same time.

view full answer...

Answer 6

The Lippert SolidStep Manual Fold-Down Steps #LC791572 referenced in your question is a great manually operated assembly that requires very little effort to fold down and back up for travel. After a good rain, I do recommend wiping the steps down…

view full answer...

Answer 7

The MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 3 Steps #MR48RR will work with your 26" door opening width and 36" entry height but the hinge of these steps does require a threshold height of 5/8" -…

view full answer...

Answer 8

You should try to locate the center point of your door frame when installing the SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames - Triple #LC791572. If you take a look at the cut out of the directions I added it does…

view full answer...

Answer 9

We've checked with Lippert in the past and they've told us that if the doorway is 25-1/2 inches wide you'd want to go with the size #LC791572 that is for 26 to 29-7/8 inches in width.

view full answer...

Answer 10

The SolidStep Manual Fold-Down Steps part #LC791572 on a Palomino Solaire BHS 240 do not appear to be replaceable due to the lack of the standard step mounting bracket underneath the trailer therefore the best option we have for you is with the…

view full answer...

Answer 11

The SolidStep Manual Fold-Down Steps part #LC791572 will fit a door way from 25" -28.9" wide when measuring the frame inside. If the factory label sticker shows a doorway width between 26"-29" then the above steps will work for…

view full answer...

Answer 12

I am happy to recommend a SolidStep option for the 2019 heartland pioneer re275. However, I would need a couple of measurements from you first to get you the correct step. First measure the door way width frame to frame like in the photo I have…

view full answer...

Lippert SolidStep Triple Step Recommendation for Winnebago 2401RG with 24 Inch Door

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching