Should I Paint U-Bolts to Protect Finish
Updated 09/13/2019 | Published 09/12/2019
Products Featured in This Question
Question:
Are these required to be painted? - Going on a utility trailer - Thanks
asked by: Mark
Expert Reply:
If you are concerned about rust and corrosion, an excellent option for you is the CE Smith U-Bolt Kit for Mounting # CE23002 which comes with galvanized plates and zinc-plated hardware. The u-bolts included are also 5-1/2 inches long and 1/2 in diameter just like in the APUBR-1 kit.
You can apply a coat of rust-resistant paint to the U-Bolt Kit # APUBR-1 if you want to but it's not required. In fact, most people don't because these components, while susceptible to rust, are not directly visible and because of where these parts are located, they will be subjected to all kinds of rocks and debris kicked up into them that would eventually abrade any paint or other protective coating off.
Product Page this Question was Asked From
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- 7/16 Inch Diameter
- 5-1/2 Inch Long
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Hands-On with the LED Trailer Fender Clearance Light
- Search Results: accessories and parts
- Search Results: suspension enhancement
- Search Results: stake pocket mount spare tire mount
- Search Results: stud mount amber clearance lights
- Shop: Brake Controller
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Article: How to Measure a Trailer Axle
- Article: Trailer Wiring Diagrams
- Search Results: trailer hubs and drums
- Shop: Malone TopTier Load Bar Kit for Utility Trailers - 250 lbs
- Shop: Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 5 on 4-1/2
- Shop: LED Trailer Fender Clearance Light - Weatherproof - 2 Diodes - Amber/Red Lens - Passenger Side
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness - Dash Knob - Up to 2 Axles - Proportional
- Shop: Snap-Loc E Track Tie-Down Anchor - Square Mounting Hole - Bolt On - 1,000 lbs - Black - Qty 1
- Q&A: Grease Recommendation for Suspension Components
- Q&A: Can I Use Grease To Lubricate Nylon Bushings On Trailer Leaf Springs?
- Q&A: Proper Mounting Location for Side Marker Lights on a Trailer
- Q&A: Converting From 5 on 5 Bolt Pattern Hubs to 5 on 4-1/2 Bolt Pattern Hubs
- Q&A: Recommended Solution to Beef Up Suspension Hangers
- Q&A: Replacing 5 on 5 Lug Pattern Idler Hub With a 5 on 4-1/2 Lug Pattern Idler Hub on Utility Trailer
- Video: In-Depth Review of the Unitized Oil Seal for Trailer Hubs
- Video: Timken Grease and Oil Seal Review
- Search Results: trailer hitch
- Video: How to Choose a Trailer Brake Controller
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
on Trailer Suspension Parts
