Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
No need to mess with bearing grease right away. This hub assembly comes pre-packed with a lithium complex based (NLGI #2) wheel bearing grease that’s ready for use. The bearings and seals are already installed, so all you have to do is slide it onto your #84 spindle, tighten it down, and you’re ready to roll. It’s a simple, quick install that gets your trailer back in service without the cleanup.
This setup includes everything needed for a full hub swap—bearings, races, grease seal, grease cap, wheel bolts, and lug nuts. Each part is factory matched so it goes together smoothly. The hubs are built from sturdy iron for consistent performance under load, giving each hub a 1,750-lb weight capacity (3,500-lb per axle).
Finding the right fit is easy with its matched bearing pair—inner bearing L68149 (1.378" ID) and outer bearing L44649 (1.063" ID). That combo fits standard #84 spindles used on 3,500-lb axles. The included 58846 grease seal (1.719" ID / 2.565" OD) locks in your grease and keeps dirt out. Every dimension lines up exactly as needed for a snug, reliable fit.
With a 5 on 5" bolt pattern and 1/2" studs, this hub works with wheels from 13" up to 15". If you’re checking what pattern you have, just measure between adjacent lugs—3" center-to-center means it’s 5 on 5". Clear specs like this make matching up new wheels or replacing old ones simple and accurate.
The iron construction and pre-installed races mean you get strength and stability from the start. Each hub face is machined flat for smooth wheel contact, keeping vibration low and wear even across your tires. Whether you’re putting together a new trailer or keeping one on standby as a spare, this pre-greased Redline hub is ready to handle steady use trip after trip.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Jeff
8/16/2025
After about a year I have put over 2000 miles on the trailer, most of it highway miles in hot weather. No problems. I put new bearings in an old hub and carry as a spare now when traveling.
Phil P.
3/17/2015
Thats an awesome trailer! Exactly what Id like to build to pull behind my JK. Im hoping these 5 on 5 hubs are the Jeep wheel pattern so I only need one spare?
Patrick B.
4/7/2015
Joseph
8/13/2022
Still our backup, ready to go!
Cross
11/15/2020
Great product, perfect fit and fast delivery. Great company!
Tregg G.
6/18/2019
No issues what-so-ever. Working perfectly with no complaints.
Edgar
3/22/2020
Its been a year, no complaints!
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robyn
2/18/2021
After a year, the hubs are working well. Dont really have a lot of miles on them, but, they seem to be performing as well as the factory originals.