Which Hubcaps for AM20766 Dexstar 16 Inch Conventional Steel Wheel

Question

Question:

I am considering these rims for a 1952 Chevy 3/4 ton truck because of the shallow offset, can you tell me what size hubcaps will fit on these rims.

asked by: Matt

0

Expert Reply:

The # PX1309SS Phoenix USA Baby Moon hub caps are compatible with the # AM20766 Dexstar 16 inch conventional steel wheel you referenced. This being said, we sell these wheels as trailer wheels. They aren't intended for use on a passenger vehicle.

expert reply by: Mike L

0

Answer 1

I believe the wheel that they are refering to is the Dexstar Conventional Steel Wheel #AM20766. This has the same 8 on 6-1/2" lug pattern that the 1953 Chevrolet Advance Design Trucks had. This wheel is only 16" in diameter where the…

view full answer...

Answer 2

Yes, it will Beau. The Dexstar Conventional Steel Wheel w/ +0.5" Offset - 16" x 6" Rim - 8 on 6-1/2 item #AM20766 has the lip built into it to work with a 12" Diameter Baby Moon Hubcap like item #PX1309SS. What kind of vehicle or…

view full answer...

Answer 3

Yes! The part you're looking for is the Dexstar Conventional Steel Wheel w/ +0.5" Offset - 16" x 6" Rim - 8 on 6-1/2 - Black #AM20766.

view full answer...

Answer 4

When measuring the offset of a tire you need to measure from where the wheel mounts to the hub to the inside bead and outside bead, with the difference being the offset. The Vesper Steel Modular Trailer Wheel - 16 inch x 6 inch Rim - 8 on 6-1/2 -…

view full answer...

Answer 5

To determine whether or not the Dexstar Conventional Steel Wheel w/ +0.5" Offset #AM20766 will fit your 1952 GMC Pickup you will simply need to compare the specs. The rim dimensions are 16" diameter x 6" wide Bolt pattern is 8 on 6-1/2…

view full answer...

Answer 6

Hey Willis, we have one steel wheel that covers everything you are lookin for with the Dexstar part #AM20766 which is a 16 inch diameter steel wheel with an 8 on 6-1/2 inch bolt pattern and a .5 inch offset.

view full answer...

Answer 7

The best option we have for a vintage style hub cap is the Americana Baby Moon Trailer Wheel Center Cap part #AM90086 which is specific to the Dexstar Conventional Steel Wheel part #AM20766. I could not confirm fit of any other style hub cap for this…

view full answer...

Answer 8

You can measure the diameter of the wheel and the diameter of the baby moon mounting ridge on the wheel if you care to (see photo), but because the Dexstar Conventional Steel Wheel you have is a standard automotive size, you can simply purchase…

view full answer...

Answer 9

Do you see the three raised bumps on the center circle section of your wheel? That's where a baby moon like the part #AM90086 fits over. You need to measure that diameter. If it's right at 9-1/4 inch this cover is what you'd need.

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Which Hubcaps for AM20766 Dexstar 16 Inch Conventional Steel Wheel

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching