Good morning Carl! Yes, there is a good startup order to follow on the Dylux RV Tankless Water Heater #DY54FR, and I like that you’re asking before just flipping switches and hoping for the best. Before firing it up, make sure the unit is connected…
Hi Eric! The Dylux RV Tankless Water Heater #DY54FR does have auto frost protection, which activates when the temperature drops below close to freezing temps. That’s a helpful feature for chilly nights while the RV is in use. I would not treat that…
We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…
Hey Michael, thanks for the picture of the panel you are looking for. We do have that as a replacement if needed with the part #LC421484. Usually the issue you are having is that the panel does need to be replaced but may as well keep troubleshooting…
Hi Thomas, I've put together a few different 12V LED 4 1/2" diameter puck light options for you so you can find the best replacement for your light! Since lights can mount in different ways, I've included puck lights that are…
Hey Scott, thanks for reaching out. At this time, we offer only one size for the Lippert Schwintek Slide-Out System part #LC34VC, and I'm sorry to say we don't have a dimensional diagram for that one. What I can tell you is the 62-5/8"…
You need a breakaway battery charger if you want to maintain the battery charge on your breakaway kit using your tow vehicle's 7-way trailer connector. The 12 volt battery on breakaway kits, like all batteries, will self-discharge over time.…
Yes, we do have a couple of idler hubs that fit the item #L44649 inner and outer bearings on your Venture boat trailer. They come in two different lug pattern sizes and are designed specifically for boat trailers. I couldn't get any information…
Hey Craig! Is this a Lippert Ground Control system? Is the part actually 304136? I asked Lippert and they said they don't have anything under 304135. If it is the 304136 the correct replacement is the Replacement Control Module for Lippert Ground…
In order to test the controller on the Lippert Ground Control 3.0 Electric Leveling System you'll first need to obtain a multimeter. Once you have this then you will need to use the ground probe and place that on the green wire coming from the…
The Kodiak Disc Brake Kit #K2HR10A11RERR is actually specifically designed to fit an AL-KO 10k #99 spindle, so this will be a perfect replacement. Though this does include the oil cap, it should be noted that it does not include the bearings or seal.…
I believe the wheel that they are refering to is the Dexstar Conventional Steel Wheel #AM20766. This has the same 8 on 6-1/2" lug pattern that the 1953 Chevrolet Advance Design Trucks had. This wheel is only 16" in diameter where the…
Filters
