Replacement Slide-Out Actuator for 2011 Crossroads Cruiser

Updated 08/13/2019 | Published 08/11/2019

Question:

I had to remove my driver slide ram and it has a sticker 7819120. How much for the entire ram? My motor works fine. I broke the attachment and bent the screw. See pictures. This is from a 2011 Crossroads Cruiser 5th wheel CF30SKP. Also one of the teeth broke the stationary wheel on the opposite slide, should I change that also?

asked by: Keith N

Helpful Expert Reply:

We do have one slide-out actuator available by itself (without the motor) with the Lippert # LC145595.

I wasn't able to track down any information using the part number you found on the sticker but you can compare the dimensions of this unit to yours to see if it will work well as a replacement. This actuator has an overall retracted length of 59 inches and an extended length of 98-3/4 inches. Its stroke length is 40 inches and is designed to work with Tuson Motors.

If one of the teeth broke off on the slide-out gear I definitely recommend replacing that as well. I have attached a link that will take you to our complete selection that you can look through.

expert reply by: Chris R