Result: axle cotter pin

Hello Jose, thanks for reaching out. What I recommend for your are the Dexter Electric Trailer Brakes #K23-086-087-00. These are the standard 10" x 2.25" brakes and they are parking brake compatible. The Dexter brakes use the same 4 bolt…

I do have an option for you but we no longer carry 10 x 1-3/4" brake assemblies. I recommend upgrading to 10 x 2-1/4" brakes as this is the more common size for 3,500 lb axles and will provide greater stopping power. For a set of 10 x…

On many drum brakes there are wear indicators at the pad material on the shoes. If the pad material is riveted on and you have reached the rivets then it is time to replace them. If you have the brakes adjusted out all the way and the braking is…

Okay let's get started here with the suspension for your 2012 Skyline Koala 27CDS with 3,500 lb Axles; for the first part regarding your equalizers and suspension upgrade kit, so long as your current equalizer is spaced 6 inches (or close to it -…

To determine the correct brakes for your trailer we'll need to first know the axle capacity. The Dexter Electric Trailer Brake Kit #23-26-27 you were looking at are designed for 3,500lb axles. From there you'll need a hub/drum assembly, which…

The Kodiak Disc Brake Kit for Dexter 10,000 Lb Axles part #K2R1058D11E does have a three year warranty but with any product, the warranty really only covers manufacturing defects. If improper installation occurred such as not yielding the correct…

The correct hub and drum assembly replacement for your Lippert 4,400 lb axle is the #8-407-5UC3-EZ. This comes with bearings and a grease seal. If you need brakes as well you can use the #LC66WD, or for self-adjusting brakes #K23-478-479.

For a Lippert 4,400 lb trailer axle the correct bearing kit is the part #BK2-100 which includes inner bearing #L68149, inner race #L68111, outer bearing #L44649, outer race #L44610, grease seal #58846, a cotter pin and a tang washer.

The Lippert Electric Trailer Brake Kit #LC66WD contains the Left #LC96WD and Right #LC46WD hand brake assemblies for a Lippert 4,400lb axle. We do not carry just the replacement shoes and springs for your axle.

If you do have need to lift the trailer we offer over-under kits for both 2-3/8-inch and 3-inch diameter axles. Kit #K71-384-00 fits 2-3/8-inch axles and kit #K71-385-00 fits 3-inch axles. Each kit will give about the same lift as the axle diameter.…

How long of a line do you need? Do you know what size you need? The most common size is 3/16 inch like part #BH-3MFS-4-5 which is 54 inches long.

With a set of properly adjusted brake assemblies installed in your drums they brakes should be very powerful unless there was grease that got in the hub at one point. The best recommendation for assemblies is the set part #AKEBRK-35-SA which are self…