Dimensions and Instructions for the Timbren Rear Suspension Enhancement for a 2008 Ford Ranger

Question

Question:

Can you provide dimensions for this product and more information on how it is mounted and where?

asked by: M. L

0

Expert Reply:

I will be happy to provide some dimensions and installation instructions for you for the Timbren rear suspension enhancement system, # TFRR050A, for your 2008 Ford Ranger. First, the height of the spring by itself is 4-3/4 inches and the bracket that attaches to the frame is 1 inch tall for a total of 5-3/4 inches. The springs have a diameter of 3-3/8 inches.

I have included a picture showing the spring dimensions and a link to the installation details for you.

expert reply by: Michael H

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Hey Bob, thanks for reaching out, and good question. For that setup, as long as the tray is properly secured in the portion that is touching the floor, it will be just fine. It might be a bit more difficult to install since you can't secure the…

view full answer...

Answer 5

In most cases, leaf springs will stretch out over time as they wear so when you look for a replacement it will be shorter than the existing. It's also important to note that the number of leaves isn't a great guide for capacity since these…

view full answer...

Answer 6

I strongly recommend going with the SumoSprings Helper Springs item #SS95GR over Timbren's like item #TNRTTNB for your 4WD 2020 Nissan Titan. Both systems will support your rear end and keep your truck level while towing but you won't notice…

view full answer...

Answer 7

Hey Mitchell, The Timbren Suspension Enhancement System #TNRTTNB is designed specifically for Pro 4x models so it wouldn't be the right fit for your SV. Both the #TNRTTNB and #TNRTTN (which would be a fit for your SV) have 5" tall springs.…

view full answer...

Answer 8

I definitely recommend going with the bump stop jounce-style springs that you are referring to as these require no maintenance and are very easy to install. They drastically reduce rear sag and also help with the overall handling of your truck. Your…

view full answer...

Answer 9

We have a Timbren kit that is designed specifically for the ZR2 versions of the 2002 Chevy S-10. For that you would want the part #TGMRS10A. A track bar would not be an issue with this kit at all.

view full answer...

Answer 10

Thank you for providing a photo of your Pro Series weight distribution hitch #49570. The assembly/installation instructions for this kit are linked for you for reference and they indicate the correct torque specs for the included hardware. It is very…

view full answer...

Answer 11

Best option would be to borrow or buy a known working torque wrench to verify that you are using the correct torque figures to install the Andersen Ranch Hitch #AM3100. Local auto parts stores typically will let people borrow them. We do have the…

view full answer...

Dimensions and Instructions for the Timbren Rear Suspension Enhancement for a 2008 Ford Ranger

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching